ADC NITRO APIs

nd6

August 17, 2023

Contributed by:

Configuration for nd6 resource.

Properties

(click to see Operations )

Name	Permissions	Description
neighbor	Read-write	Link-local IPv6 address of the adjacent network device to add to the ND6 table.
mac	Read-write	MAC address of the adjacent network device.
ifnum	Read-write	Interface through which the adjacent network device is available, specified in slot/port notation (for example, 1/3). Use spaces to separate multiple entries.
vlan	Read-write	Integer value that uniquely identifies the VLAN on which the adjacent network device exists. Minimum value = 1 Maximum value = 4094
vxlan	Read-write	ID of the VXLAN on which the IPv6 address of this ND6 entry is reachable. Minimum value = 1 Maximum value = 16777215
vtep	Read-write	IP address of the VXLAN tunnel endpoint (VTEP) through which the IPv6 address of this ND6 entry is reachable. Minimum length = 1
td	Read-write	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
nodeid	Read-write	Unique number that identifies the cluster node. Minimum value = 0 Maximum value = 31
state	Read-only	ND6 state. Default value: REACHABLE Possible values = INCOMPLETE, REACHABLE, STALE, DELAY, PROBE
timeout	Read-only	Time elapsed.
flags	Read-only	flag for static/permanent entry.
controlplane	Read-only	This nd6 entry is populated by a control plane protocol.
channel	Read-only	The tunnel that is bound to a netbridge.
__count	Read-only	count parameter

Operations

(click to see Properties )

ADD
CLEAR
DELETE
GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/nd6

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nd6":{
<b>      "neighbor":<String_value>,
</b><b>      "mac":<String_value>,
</b>      "ifnum":<String_value>,
      "vlan":<Integer_value>,
      "vxlan":<Double_value>,
      "vtep":<String_value>,
      "td":<Double_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

clear

URL: http:// <netscaler-ip-address> /nitro/v1/config/nd6? action=clear

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nd6":{
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/nd6/ neighbor_value<String>

Query-parameters:

args=vlan: <Integer_value> ,vxlan: <Double_value> ,td: <Double_value>

</b>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/nd6

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/nd6? args=neighbor: <String_value> ,td: <Double_value> ,nodeid: <Double_value>

Use this query-parameter to get nd6 resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/nd6? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/nd6? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nd6 resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/nd6? view=summary

Use this query-parameter to get the summary output of nd6 resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/nd6? pagesize=#no;pageno=#no

Use this query-parameter to get the nd6 resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nd6": [ {
neighbor:<String_value>,td:<Double_value>,nodeid:<Double_value>      "mac":<String_value>,
      "state":<String_value>,
      "timeout":<Double_value>,
      "ifnum":<String_value>,
      "vlan":<Integer_value>,
      "vxlan":<Double_value>,
      "vtep":<String_value>,
      "flags":<Double_value>,
      "controlplane":<Boolean_value>,
      "channel":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/nd6? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nd6": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

nd6

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

nd6

Properties

Operations

add

clear

delete

get (all)

count

In this article