ADC NITRO APIs

pcpmap

August 17, 2023

Contributed by:

Configuration for server resource.

Properties

(click to see Operations )

Name	Permissions	Description
nattype	Read-write	Type of sessions to be displayed. Default value: NAT44 Possible values = NAT44, DS-Lite, NAT64
pcpsrcip	Read-only	Internal IP address.
subscrip	Read-only	IPV4 src address of Client in DS-Lite.
pcpsrcport	Read-only	Internal Port. Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
pcpdstip	Read-only	Remote PEER IP address.
pcpdstport	Read-only	Remote PEER Port. Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
pcpnatip	Read-only	External IP address.
pcpnatport	Read-only	External Port Number. Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
pcpprotocol	Read-only	Protocol of the PCP mapping. Possible values = HopOpt, icmp, igmp, ggp, ipv4, st, tcp, udp
pcpaddr	Read-only	Address of PCP Map entity.
pcpnounce	Read-only	PCP Mapping Nounce.
pcprefcnt	Read-only	Refcount, which indicates how many session is active.
pcplifetime	Read-only	Integer value that shows the requested lifetime.
__count	Read-only	count parameter

Operations

(click to see Properties )

GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/pcpmap

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? args=nattype: <String_value>

Use this query-parameter to get pcpmap resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of pcpmap resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? view=summary

Use this query-parameter to get the summary output of pcpmap resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? pagesize=#no;pageno=#no

Use this query-parameter to get the pcpmap resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "pcpmap": [ {
nattype:<String_value>      "pcpsrcip":<String_value>,
      "subscrip":<String_value>,
      "pcpsrcport":<Integer_value>,
      "pcpdstip":<String_value>,
      "pcpdstport":<Integer_value>,
      "pcpnatip":<String_value>,
      "pcpnatport":<Integer_value>,
      "pcpprotocol":<String_value>,
      "pcpaddr":<Double_value>,
      "pcpnounce":<Double_value>,
      "pcprefcnt":<Double_value>,
      "pcplifetime":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/pcpmap? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "pcpmap": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

pcpmap

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

pcpmap

Properties

Operations

get (all)

count

In this article