Developer Documentation
ADC NITRO APIs
Current Release 13.1 13

lsnrtspalgprofile

August 17, 2023
Contributed by: 
C

Configuration for LSN RTSPALG Profile resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
rtspalgprofilename Read-write The name of the RTSPALG Profile.

Minimum length = 1

Maximum length = 127
rtspidletimeout Read-write Idle timeout for the rtsp sessions in seconds.

Default value: 120
rtspportrange Read-write port for the RTSP.
rtsptransportprotocol Read-write RTSP ALG Profile transport protocol type.

Default value: TCP

Possible values = TCP, UDP
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT
  • DELETE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: *

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lsnrtspalgprofile":{
<b>      "rtspalgprofilename":<String_value>,
</b>      "rtspidletimeout":<Double_value>,
<b>      "rtspportrange":<String_value>,
</b>      "rtsptransportprotocol":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lsnrtspalgprofile":{
<b>      "rtspalgprofilename":<String_value>,
</b>      "rtspidletimeout":<Double_value>,
      "rtspportrange":<String_value>,
      "rtsptransportprotocol":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lsnrtspalgprofile":{
<b>      "rtspalgprofilename":<String_value>,
</b>      "rtspidletimeout":true,
      "rtspportrange":true,
      "rtsptransportprotocol":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile/ rtspalgprofilename_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsnrtspalgprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? view=summary

Use this query-parameter to get the summary output of lsnrtspalgprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? pagesize=#no;pageno=#no

Use this query-parameter to get the lsnrtspalgprofile resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{ "lsnrtspalgprofile": [ {
      "rtspalgprofilename":<String_value>,
      "rtspidletimeout":<Double_value>,
      "rtspportrange":<String_value>,
      "rtsptransportprotocol":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile/ rtspalgprofilename_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile/ rtspalgprofilename_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile/ rtspalgprofilename_value<String> ? view=summary

Use this query-parameter to get the summary output of lsnrtspalgprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{  "lsnrtspalgprofile": [ {
      "rtspalgprofilename":<String_value>,
      "rtspidletimeout":<Double_value>,
      "rtspportrange":<String_value>,
      "rtsptransportprotocol":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgprofile? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{ "lsnrtspalgprofile": [ { "__count": "#no"} ] }

<!--NeedCopy-->
lsnrtspalgprofile
August 17, 2023
Contributed by: 
C
August 17, 2023
Contributed by: 
C

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.