authentication-ldapAction
The following operations can be performed on “authentication-ldapAction”:
add | set | rm | unset | show |
add authentication ldapAction
Creates an action (profile) for an LDAP server. This profile contains all configuration data needed to communicate with that LDAP server.
Synopsis
add authentication ldapAction
Arguments
name Name for the new LDAP action. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the LDAP action is added.
The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication action” or ‘my authentication action’).
serverIP IP address assigned to the LDAP server.
serverName LDAP server name as a FQDN. Mutually exclusive with LDAP IP address.
serverPort Port on which the LDAP server accepts connections. Default value: 389 Minimum value: 1
authTimeout Number of seconds the Citrix ADC waits for a response from the RADIUS server. Default value: 3 Minimum value: 1
ldapBase Base (node) from which to start LDAP searches. If the LDAP server is running locally, the default value of base is dc=netscaler, dc=com.
ldapBindDn Full distinguished name (DN) that is used to bind to the LDAP server. Default: cn=Manager,dc=netscaler,dc=com
ldapBindDnPassword Password used to bind to the LDAP server.
ldapLoginName LDAP login name attribute. The Citrix ADC uses the LDAP login name to query external LDAP servers or Active Directories.
searchFilter String to be combined with the default LDAP user search string to form the search value. For example, if the search filter “vpnallowed=true” is combined with the LDAP login name “samaccount” and the user-supplied username is “bob”, the result is the LDAP search string ““&(vpnallowed=true)(samaccount=bob)”” (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.).
groupAttrName LDAP group attribute name. Used for group extraction on the LDAP server.
subAttributeName LDAP group sub-attribute name. Used for group extraction from the LDAP server.
secType Type of security used for communications between the Citrix ADC and the LDAP server. For the PLAINTEXT setting, no encryption is required.
Possible values: PLAINTEXT, TLS, SSL Default value: PLAINTEXT
svrType The type of LDAP server.
Possible values: AD, NDS Default value: AAA_LDAP_SERVER_TYPE_DEFAULT
ssoNameAttribute LDAP single signon (SSO) attribute. The Citrix ADC uses the SSO name attribute to query external LDAP servers or Active Directories for an alternate username.
authentication Perform LDAP authentication. If authentication is disabled, any LDAP authentication attempt returns authentication success if the user is found. CAUTION! Authentication should be disabled only for authorization group extraction or where other (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
Possible values: ENABLED, DISABLED Default value: ENABLED
requireUser Require a successful user search for authentication. CAUTION! This field should be set to NO only if usersearch not required [Both username validation as well as password validation skipped] and (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
Possible values: YES, NO Default value: YES
passwdChange Allow password change requests.
Possible values: ENABLED, DISABLED Default value: DISABLED
nestedGroupExtraction Allow nested group extraction, in which the Citrix ADC queries external LDAP servers to determine whether a group is part of another group.
Possible values: ON, OFF Default value: OFF
maxNestingLevel If nested group extraction is ON, specifies the number of levels up to which group extraction is performed. Default value: 2 Minimum value: 2
followReferrals Setting this option to ON enables following LDAP referrals received from the LDAP server.
Possible values: ON, OFF Default value: OFF
maxLDAPReferrals Specifies the maximum number of nested referrals to follow. Default value: 1 Minimum value: 1
referralDNSLookup Specifies the DNS Record lookup Type for the referrals
Possible values: A-REC, SRV-REC, MSSRV-REC Default value: A-REC
msSRVRecordlocation
MSSRV Specific parameter. Used to locate the DNS node to which the SRV record pertains in the domainname. The domainname is appended to it to form the srv record.
Example : For “dc._msdcs”, the srv record formed is _ldap._tcp.dc._msdcs.
validateServerCert When to validate LDAP server certs
Possible values: YES, NO Default value: NO
ldapHostname Hostname for the LDAP server. If -validateServerCert is ON then this must be the host name on the certificate from the LDAP server. A hostname mismatch will cause a connection failure.
groupNameIdentifier Name that uniquely identifies a group in LDAP or Active Directory.
groupSearchAttribute LDAP group search attribute. Used to determine to which groups a group belongs.
groupSearchSubAttribute LDAP group search subattribute. Used to determine to which groups a group belongs.
groupSearchFilter String to be combined with the default LDAP group search string to form the search value. For example, the group search filter ““vpnallowed=true”” when combined with the group identifier ““samaccount”” and the group name ““g1”” yields the LDAP search string “”(&(vpnallowed=true)(samaccount=g1)””. If nestedGroupExtraction is ENABLED, the filter is applied on the first level group search as well, otherwise first level groups (of which user is a direct member of) will be fetched without applying this filter. (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.)
defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.
Attribute1 Expression that would be evaluated to extract attribute1 from the ldap response
Attribute2 Expression that would be evaluated to extract attribute2 from the ldap response
Attribute3 Expression that would be evaluated to extract attribute3 from the ldap response
Attribute4 Expression that would be evaluated to extract attribute4 from the ldap response
Attribute5 Expression that would be evaluated to extract attribute5 from the ldap response
Attribute6 Expression that would be evaluated to extract attribute6 from the ldap response
Attribute7 Expression that would be evaluated to extract attribute7 from the ldap response
Attribute8 Expression that would be evaluated to extract attribute8 from the ldap response
Attribute9 Expression that would be evaluated to extract attribute9 from the ldap response
Attribute10 Expression that would be evaluated to extract attribute10 from the ldap response
Attribute11 Expression that would be evaluated to extract attribute11 from the ldap response
Attribute12 Expression that would be evaluated to extract attribute12 from the ldap response
Attribute13 Expression that would be evaluated to extract attribute13 from the ldap response
Attribute14 Expression that would be evaluated to extract attribute14 from the ldap response
Attribute15 Expression that would be evaluated to extract attribute15 from the ldap response
Attribute16 Expression that would be evaluated to extract attribute16 from the ldap response
Attributes List of attribute names separated by ‘,’ which needs to be fetched from ldap server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session
sshPublicKey SSH PublicKey is attribute on AD. This attribute is used to retrieve ssh PublicKey for RBA authentication
pushService Name of the service used to send push notifications
OTPSecret OneTimePassword(OTP) Secret key attribute on AD. This attribute is used to store and retrieve secret key used for OTP check
email The Citrix ADC uses the email attribute to query the Active Directory for the email id of a user Default value: mail
KBAttribute KnowledgeBasedAuthentication(KBA) attribute on AD. This attribute is used to store and retrieve preconfigured Question and Answer knowledge base used for KBA authentication.
alternateEmailAttr The NetScaler appliance uses the alternateive email attribute to query the Active Directory for the alternative email id of a user
CloudAttributes The Citrix ADC uses the cloud attributes to extract additional attributes from LDAP servers required for Citrix Cloud operations
Possible values: ENABLED, DISABLED Default value: DISABLED
set authentication ldapAction
Modifies an LDAP server profile (action.) The profile contains all configuration data needed to communicate with that LDAP server.
Synopsis
set authentication ldapAction
Arguments
name Name of the LDAP profile to modify.
serverIP IP address assigned to the LDAP server.
serverName LDAP server name as a FQDN. Mutually exclusive with LDAP IP address.
serverPort Port on which the LDAP server accepts connections. Default value: 389 Minimum value: 1
authTimeout Number of seconds the Citrix ADC waits for a response from the RADIUS server. Default value: 3 Minimum value: 1
ldapBase Base (node) from which to start LDAP searches. If the LDAP server is running locally, the default value of base is dc=netscaler, dc=com.
ldapBindDn Full distinguished name (DN) that is used to bind to the LDAP server. Default: cn=Manager,dc=netscaler,dc=com
ldapBindDnPassword Password used to bind to the LDAP server.
ldapLoginName LDAP login name attribute. The Citrix ADC uses the LDAP login name to query external LDAP servers or Active Directories.
searchFilter String to be combined with the default LDAP user search string to form the search value. For example, if the search filter “vpnallowed=true” is combined with the LDAP login name “samaccount” and the user-supplied username is “bob”, the result is the LDAP search string ““&(vpnallowed=true)(samaccount=bob)”” (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.).
groupAttrName LDAP group attribute name. Used for group extraction on the LDAP server.
subAttributeName LDAP group sub-attribute name. Used for group extraction from the LDAP server.
secType Type of security used for communications between the Citrix ADC and the LDAP server. For the PLAINTEXT setting, no encryption is required.
Possible values: PLAINTEXT, TLS, SSL Default value: PLAINTEXT
svrType The type of LDAP server.
Possible values: AD, NDS Default value: AAA_LDAP_SERVER_TYPE_DEFAULT
ssoNameAttribute LDAP single signon (SSO) attribute. The Citrix ADC uses the SSO name attribute to query external LDAP servers or Active Directories for an alternate username.
authentication Perform LDAP authentication. If authentication is disabled, any LDAP authentication attempt returns authentication success if the user is found. CAUTION! Authentication should be disabled only for authorization group extraction or where other (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
Possible values: ENABLED, DISABLED Default value: ENABLED
requireUser Require a successful user search for authentication. CAUTION! This field should be set to NO only if usersearch not required [Both username validation as well as password validation skipped] and (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
Possible values: YES, NO Default value: YES
passwdChange Allow password change requests.
Possible values: ENABLED, DISABLED Default value: DISABLED
validateServerCert When to validate LDAP server certs
Possible values: YES, NO Default value: NO
ldapHostname Hostname for the LDAP server. If -validateServerCert is ON then this must be the host name on the certificate from the LDAP server. A hostname mismatch will cause a connection failure.
nestedGroupExtraction Allow nested group extraction, in which the Citrix ADC queries external LDAP servers to determine whether a group is part of another group.
Possible values: ON, OFF Default value: OFF
maxNestingLevel If nested group extraction is ON, specifies the number of levels up to which group extraction is performed. Default value: 2 Minimum value: 2
groupNameIdentifier Name that uniquely identifies a group in LDAP or Active Directory.
groupSearchAttribute LDAP group search attribute. Used to determine to which groups a group belongs.
groupSearchSubAttribute LDAP group search subattribute. Used to determine to which groups a group belongs.
groupSearchFilter String to be combined with the default LDAP group search string to form the search value. For example, the group search filter ““vpnallowed=true”” when combined with the group identifier ““samaccount”” and the group name ““g1”” yields the LDAP search string “”(&(vpnallowed=true)(samaccount=g1)””. If nestedGroupExtraction is ENABLED, the filter is applied on the first level group search as well, otherwise first level groups (of which user is a direct member of) will be fetched without applying this filter. (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.)
followReferrals Setting this option to ON enables following LDAP referrals received from the LDAP server.
Possible values: ON, OFF Default value: OFF
maxLDAPReferrals Specifies the maximum number of nested referrals to follow. Default value: 1 Minimum value: 1
referralDNSLookup Specifies the DNS Record lookup Type for the referrals
Possible values: A-REC, SRV-REC, MSSRV-REC Default value: A-REC
msSRVRecordlocation
MSSRV Specific parameter. Used to locate the DNS node to which the SRV record pertains in the domainname. The domainname is appended to it to form the srv record.
Example : For “dc._msdcs”, the srv record formed is _ldap._tcp.dc._msdcs.
defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.
Attribute1 Expression that would be evaluated to extract attribute1 from the ldap response
Attribute2 Expression that would be evaluated to extract attribute2 from the ldap response
Attribute3 Expression that would be evaluated to extract attribute3 from the ldap response
Attribute4 Expression that would be evaluated to extract attribute4 from the ldap response
Attribute5 Expression that would be evaluated to extract attribute5 from the ldap response
Attribute6 Expression that would be evaluated to extract attribute6 from the ldap response
Attribute7 Expression that would be evaluated to extract attribute7 from the ldap response
Attribute8 Expression that would be evaluated to extract attribute8 from the ldap response
Attribute9 Expression that would be evaluated to extract attribute9 from the ldap response
Attribute10 Expression that would be evaluated to extract attribute10 from the ldap response
Attribute11 Expression that would be evaluated to extract attribute11 from the ldap response
Attribute12 Expression that would be evaluated to extract attribute12 from the ldap response
Attribute13 Expression that would be evaluated to extract attribute13 from the ldap response
Attribute14 Expression that would be evaluated to extract attribute14 from the ldap response
Attribute15 Expression that would be evaluated to extract attribute15 from the ldap response
Attribute16 Expression that would be evaluated to extract attribute16 from the ldap response
Attributes List of attribute names separated by ‘,’ which needs to be fetched from ldap server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session
OTPSecret OneTimePassword(OTP) Secret key attribute on AD. This attribute is used to store and retrieve secret key used for OTP check
sshPublicKey SSH PublicKey is attribute on AD. This attribute is used to retrieve ssh PublicKey for RBA authentication
pushService Name of the service used to send push notifications
email The Citrix ADC uses the email attribute to query the Active Directory for the email id of a user Default value: mail
KBAttribute KnowledgeBasedAuthentication(KBA) attribute on AD. This attribute is used to store and retrieve preconfigured Question and Answer knowledge base used for KBA authentication.
alternateEmailAttr The NetScaler appliance uses the alternateive email attribute to query the Active Directory for the alternative email id of a user
CloudAttributes The Citrix ADC uses the cloud attributes to extract additional attributes from LDAP servers required for Citrix Cloud operations
Possible values: ENABLED, DISABLED Default value: DISABLED
rm authentication ldapAction
Removes an LDAP profile (action). NOTE: An action cannot be removed if it is bound to a policy.
Synopsis
rm authentication ldapAction
Arguments
name Name of the LDAP profile (action) to be removed.
unset authentication ldapAction
Use this command to remove authentication ldapAction settings.Refer to the set authentication ldapAction command for meanings of the arguments.
Synopsis
unset authentication ldapAction
show authentication ldapAction
Displays the current configuration settings for the specified LDAP profile (action).
Synopsis
show authentication ldapAction [
Arguments
name Name of the LDAP profile.
Output
serverIP IP address assigned to the LDAP server.
serverName LDAP server name as a FQDN. Mutually exclusive with LDAP IP address.
serverPort Port on which the LDAP server accepts connections.
authTimeout Number of seconds the Citrix ADC waits for a response from the RADIUS server.
ldapBindDn Full distinguished name (DN) that is used to bind to the LDAP server. Default: cn=Manager,dc=netscaler,dc=com
ldapBindDnPassword Password used to bind to the LDAP server.
ldapLoginName LDAP login name attribute. The Citrix ADC uses the LDAP login name to query external LDAP servers or Active Directories.
ldapBase Base (node) from which to start LDAP searches. If the LDAP server is running locally, the default value of base is dc=netscaler, dc=com.
searchFilter String to be combined with the default LDAP user search string to form the search value. For example, if the search filter “vpnallowed=true” is combined with the LDAP login name “samaccount” and the user-supplied username is “bob”, the result is the LDAP search string ““&(vpnallowed=true)(samaccount=bob)”” (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.).
groupAttrName LDAP group attribute name. Used for group extraction on the LDAP server.
subAttributeName LDAP group sub-attribute name. Used for group extraction from the LDAP server.
secType Type of security used for communications between the Citrix ADC and the LDAP server. For the PLAINTEXT setting, no encryption is required.
svrType The type of LDAP server.
ssoNameAttribute LDAP single signon (SSO) attribute. The Citrix ADC uses the SSO name attribute to query external LDAP servers or Active Directories for an alternate username.
authentication Perform LDAP authentication. If authentication is disabled, any LDAP authentication attempt returns authentication success if the user is found. CAUTION! Authentication should be disabled only for authorization group extraction or where other (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
requireUser Require a successful user search for authentication. CAUTION! This field should be set to NO only if usersearch not required [Both username validation as well as password validation skipped] and (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary.
Success Failure stateflag nestedGroupExtraction Allow nested group extraction, in which the Citrix ADC queries external LDAP servers to determine whether a group is part of another group.
maxNestingLevel If nested group extraction is ON, specifies the number of levels up to which group extraction is performed.
followReferrals Setting this option to ON enables following LDAP referrals received from the LDAP server.
maxLDAPReferrals Specifies the maximum number of nested referrals to follow.
referralDNSLookup Specifies the DNS Record lookup Type for the referrals
msSRVRecordlocation
MSSRV Specific parameter. Used to locate the DNS node to which the SRV record pertains in the domainname. The domainname is appended to it to form the srv record.
Example : For “dc._msdcs”, the srv record formed is _ldap._tcp.dc._msdcs.
validateServerCert When to validate LDAP server certs
ldapHostname Hostname for the LDAP server. If -validateServerCert is ON then this must be the host name on the certificate from the LDAP server. A hostname mismatch will cause a connection failure.
groupNameIdentifier Name that uniquely identifies a group in LDAP or Active Directory.
groupSearchAttribute LDAP group search attribute. Used to determine to which groups a group belongs.
groupSearchSubAttribute LDAP group search subattribute. Used to determine to which groups a group belongs.
groupSearchFilter String to be combined with the default LDAP group search string to form the search value. For example, the group search filter ““vpnallowed=true”” when combined with the group identifier ““samaccount”” and the group name ““g1”” yields the LDAP search string “”(&(vpnallowed=true)(samaccount=g1)””. If nestedGroupExtraction is ENABLED, the filter is applied on the first level group search as well, otherwise first level groups (of which user is a direct member of) will be fetched without applying this filter. (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.)
passwdChange Allow password change requests.
defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.
Attribute1 Expression that would be evaluated to extract attribute1 from the ldap response
Attribute2 Expression that would be evaluated to extract attribute2 from the ldap response
Attribute3 Expression that would be evaluated to extract attribute3 from the ldap response
Attribute4 Expression that would be evaluated to extract attribute4 from the ldap response
Attribute5 Expression that would be evaluated to extract attribute5 from the ldap response
Attribute6 Expression that would be evaluated to extract attribute6 from the ldap response
Attribute7 Expression that would be evaluated to extract attribute7 from the ldap response
Attribute8 Expression that would be evaluated to extract attribute8 from the ldap response
Attribute9 Expression that would be evaluated to extract attribute9 from the ldap response
Attribute10 Expression that would be evaluated to extract attribute10 from the ldap response
Attribute11 Expression that would be evaluated to extract attribute11 from the ldap response
Attribute12 Expression that would be evaluated to extract attribute12 from the ldap response
Attribute13 Expression that would be evaluated to extract attribute13 from the ldap response
Attribute14 Expression that would be evaluated to extract attribute14 from the ldap response
Attribute15 Expression that would be evaluated to extract attribute15 from the ldap response
Attribute16 Expression that would be evaluated to extract attribute16 from the ldap response
Attributes List of attribute names separated by ‘,’ which needs to be fetched from ldap server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session
OTPSecret OneTimePassword(OTP) Secret key attribute on AD. This attribute is used to store and retrieve secret key used for OTP check
sshPublicKey SSH PublicKey is attribute on AD. This attribute is used to retrieve ssh PublicKey for RBA authentication
pushService Name of the service used to send push notifications
email The Citrix ADC uses the email attribute to query the Active Directory for the email id of a user
KBAttribute KnowledgeBasedAuthentication(KBA) attribute on AD. This attribute is used to store and retrieve preconfigured Question and Answer knowledge base used for KBA authentication.
alternateEmailAttr The NetScaler appliance uses the alternateive email attribute to query the Active Directory for the alternative email id of a user
CloudAttributes The Citrix ADC uses the cloud attributes to extract additional attributes from LDAP servers required for Citrix Cloud operations
devno count