Developer Documentation
ADC CLI Commands
Current Release 13.1 13.0 12.1

ica-latencyprofile

May 28, 2024
Contributed by: 
C

The following operations can be performed on “ica-latencyprofile”:

set rm add unset show

set ica latencyprofile

This command modifies the specified parameters of the specified ica l7latencyprofile.

Synopsis

set ica latencyprofile \[-l7LatencyMonitoring \( ENABLED | DISABLED )] \[-l7LatencyThresholdFactor <positive\_integer>] \[-l7LatencyWaitTime <positive\_integer>] \[-l7LatencyNotifyInterval <positive\_integer>] \[-l7LatencyMaxNotifyCount <positive\_integer>]

Arguments

name Name of the profile that you want to modify.

l7LatencyMonitoring Enable/Disable L7 Latency monitoring for L7 latency notifications

Possible values: ENABLED, DISABLED Default value: DISABLED

l7LatencyThresholdFactor L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported Default value: 4 Minimum value: 2 Maximum value: 65535

l7LatencyWaitTime L7 Latency Wait time. This is the time for which the Citrix ADC waits after the threshold is exceeded before it sends out a Notification to the Insight Center. Default value: 20 Minimum value: 1 Maximum value: 65535

l7LatencyNotifyInterval L7 Latency Notify Interval. This is the interval at which the Citrix ADC sends out notifications to the Insight Center after the wait time has passed. Default value: 20 Minimum value: 1 Maximum value: 65535

l7LatencyMaxNotifyCount L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold. Default value: 5 Minimum value: 1 Maximum value: 65535

Example

set ica l7latencyprofile profile1 -latencyThresholdfactor 20

rm ica latencyprofile

This command removes the specified ica l7latencyprofile.

Synopsis

rm ica latencyprofile

Arguments

name Name of the ICA l7latencyprofile.

Example

rm ica l7latencyprofile profile1

add ica latencyprofile

This command creates an ica latencyprofile with the options specified.

Synopsis

add ica latencyprofile \[-l7LatencyMonitoring \( ENABLED | DISABLED )] \[-l7LatencyThresholdFactor <positive\_integer>] \[-l7LatencyWaitTime <positive\_integer>] \[-l7LatencyNotifyInterval <positive\_integer>] \[-l7LatencyMaxNotifyCount <positive\_integer>]

Arguments

name Name for the ICA latencyprofile. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the ICA latency profile is added.

The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my ica l7latencyprofile” or ‘my ica l7latencyprofile’).

l7LatencyMonitoring Enable/Disable L7 Latency monitoring for L7 latency notifications

Possible values: ENABLED, DISABLED Default value: DISABLED

l7LatencyThresholdFactor L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported Default value: 4 Minimum value: 2 Maximum value: 65535

l7LatencyWaitTime L7 Latency Wait time. This is the time for which the Citrix ADC waits after the threshold is exceeded before it sends out a Notification to the Insight Center. Default value: 20 Minimum value: 1 Maximum value: 65535

l7LatencyNotifyInterval L7 Latency Notify Interval. This is the interval at which the Citrix ADC sends out notifications to the Insight Center after the wait time has passed. Default value: 20 Minimum value: 1 Maximum value: 65535

l7LatencyMaxNotifyCount L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold. Default value: 5 Minimum value: 1 Maximum value: 65535

Example

add ica latencyprofile profile1 -l7latencythresholdfactor 4

unset ica latencyprofile

Use this command to remove ica latencyprofile settings.Refer to the set ica latencyprofile command for meanings of the arguments.

Synopsis

unset ica latencyprofile [-l7LatencyMonitoring] [-l7LatencyThresholdFactor] [-l7LatencyWaitTime] [-l7LatencyNotifyInterval] [-l7LatencyMaxNotifyCount]

show ica latencyprofile

Displays details of the specified ica l7latencyprofile. If no l7latencyprofile is specified, displays a list of ica l7latencyprofiles on the Citrix ADC.

Synopsis

show ica latencyprofile []

Arguments

name Name of the ica l7latencyprofile.

Output

stateflag l7LatencyMonitoring Enable/Disable L7 Latency monitoring for L7 latency notifications

l7LatencyThresholdFactor L7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported

l7LatencyWaitTime L7 Latency Wait time. This is the time for which the Citrix ADC waits after the threshold is exceeded before it sends out a Notification to the Insight Center.

l7LatencyNotifyInterval L7 Latency Notify Interval. This is the interval at which the Citrix ADC sends out notifications to the Insight Center after the wait time has passed.

l7LatencyMaxNotifyCount L7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold.

refCnt Number of entities using this l7latencyprofile

builtin Indicates that the ICA latencyprofile is a built-in (SYSTEM INTERNAL) type.

feature The feature to be checked while applying this config

isDefault A value of true is returned if it is a default l7latencyprofile

devno count

Example

sh ica l7latencyprofile profile1

ica-latencyprofile
May 28, 2024
Contributed by: 
C
May 28, 2024
Contributed by: 
C

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.