cache-contentGroup
The following operations can be performed on “cache-contentGroup”:
save | show | set | expire | unset | rm | stat | flush | add |
save cache contentGroup
Save the objects in the specified content group.
Synopsis
save cache contentGroup
Arguments
name The name of the content group whose objects are to be save.
tosecondary content group whose objects are to be sent to secondary.
Possible values: YES, NO Default value: NO
show cache contentGroup
Displays information about all content groups, or about the specified content group.
Synopsis
show cache contentGroup [
Arguments
name Name of the content group about which to display information.
Output
flags Flags.
type The type of the content group.
relExpiry The relative expiry time in seconds.
relExpiryMilliSec Relative expiry time, in milliseconds, after which to expire an object cached in this content group.
absExpiry Local time, up to 4 times a day, at which all objects in the content group must expire.
CLI Users:
For example, to specify that the objects in the content group should expire by 11:00 PM, type the following command: add cache contentgroup
absExpiryGMT Coordinated Universal Time (GMT), up to 4 times a day, when all objects in the content group must expire.
heurExpiryParam Heuristic expiry time, in percent of the duration, since the object was last modified.
weakPosRelExpiry Relative expiry time, in seconds, for expiring positive responses with response codes between 200 and 399. Cannot be used in combination with other Expiry attributes. Similar to -relExpiry but has lower precedence.
weakNegRelExpiry Relative expiry time, in seconds, for expiring negative responses. This value is used only if the expiry time cannot be determined from any other source. It is applicable only to the following status codes: 307, 403, 404, and 410.
hitParams Parameters to use for parameterized hit evaluation of an object. Up to 128 parameters can be specified. Mutually exclusive with the Hit Selector parameter.
invalParams Parameters for parameterized invalidation of an object. You can specify up to 8 parameters. Mutually exclusive with invalSelector.
ignoreParamValueCase Ignore case when comparing parameter values during parameterized hit evaluation. (Parameter value case is ignored by default during parameterized invalidation.)
matchCookies Evaluate for parameters in the cookie header also.
invalRestrictedToHost Take the host header into account during parameterized invalidation.
pollEveryTime Always poll for the objects in this content group. That is, retrieve the objects from the origin server whenever they are requested.
ignoreReloadReq Ignore any request to reload a cached object from the origin server. To guard against Denial of Service attacks, set this parameter to YES. For RFC-compliant behavior, set it to NO.
removeCookies Remove cookies from responses.
prefetch Attempt to refresh objects that are about to go stale.
prefetchPeriod Time period, in seconds before an object’s calculated expiry time, during which to attempt prefetch.
prefetchPeriodMilliSec Time period, in milliseconds before an object’s calculated expiry time, during which to attempt prefetch.
prefetchCur Current outstanding prefetches.
prefetchMaxPending Maximum number of outstanding prefetches that can be queued for the content group.
flashCache Perform flash cache. Mutually exclusive with Poll Every Time (PET) on the same content group.
expireAtLastByte Force expiration of the content immediately after the response is downloaded (upon receipt of the last byte of the response body). Applicable only to positive responses.
insertVia Insert a Via header into the response.
insertAge Insert an Age header into the response. An Age header contains information about the age of the object, in seconds, as calculated by the integrated cache.
insertETag Insert an ETag header in the response. With ETag header insertion, the integrated cache does not serve full responses on repeat requests.
cacheControl Insert a Cache-Control header into the response.
quickAbortSize If the size of an object that is being downloaded is less than or equal to the quick abort value, and a client aborts during the download, the cache stops downloading the response. If the object is larger than the quick abort size, the cache continues to download the response.
minResSize Minimum size of a response that can be cached in this content group. Default minimum response size is 0.
maxResSize Maximum size of a response that can be cached in this content group.
memUsage Current memory usage.
memDUsage Current disk memory usage.
diskLimit Maximum amount of disk that the cache can use. The effective limit is based on the available memory of the Citrix ADC.
memLimit Maximum amount of memory that the cache can use. The effective limit is based on the available memory of the Citrix ADC.
ignoreReqCachingHdrs Ignore Cache-Control and Pragma headers in the incoming request.
cacheNon304Hits Cache non 304 hits.
cache304Hits Cache 304 hits.
cacheCells Number of cells.
cacheGroupIncarnation Cache group incarnation.
minHits Number of hits that qualifies a response for storage in this content group.
alwaysEvalPolicies Force policy evaluation for each response arriving from the origin server. Cannot be set to YES if the Prefetch parameter is also set to YES.
persist Setting persist to YES causes IC to save objects in contentgroup to disk.
persistHA Setting persistHA to YES causes IC to save objects in contentgroup to Secondary node in HA deployment.
pinned Do not flush objects from this content group under memory pressure.
lazyDnsResolve Perform DNS resolution for responses only if the destination IP address in the request does not match the destination IP address of the cached response.
hitSelector Selector for evaluating whether an object gets stored in a particular content group. A selector is an abstraction for a collection of PIXL expressions.
invalSelector Selector for invalidating objects in the content group. A selector is an abstraction for a collection of PIXL expressions.
policyName Active cache policies refering to this group.
cacheNumInvalPolicy Number of active Invalidation policies refering to this group.
markerCells Numbers of marker cells in this group.
builtin feature The feature to be checked while applying this config
devno count stateflag
set cache contentGroup
Modifies the specified attributes of the content group.
Synopsis
set cache contentGroup
Arguments
name Name of the content group to be modified.
weakPosRelExpiry Relative expiry time, in seconds, for expiring positive responses with response codes between 200 and 399. Cannot be used in combination with other Expiry attributes. Similar to -relExpiry but has lower precedence. Maximum value: 31536000
heurExpiryParam Heuristic expiry time, in percent of the duration, since the object was last modified. Minimum value: 0 Maximum value: 100
relExpiry Relative expiry time, in seconds, after which to expire an object cached in this content group. Default value: -1 Maximum value: 31536000
relExpiryMilliSec Relative expiry time, in milliseconds, after which to expire an object cached in this content group. Default value: -1 Maximum value: 86400000
absExpiry Local time, up to 4 times a day, at which all objects in the content group must expire.
CLI Users:
For example, to specify that the objects in the content group should expire by 11:00 PM, type the following command: add cache contentgroup
absExpiryGMT Coordinated Universal Time (GMT), up to 4 times a day, when all objects in the content group must expire.
weakNegRelExpiry Relative expiry time, in seconds, for expiring negative responses. This value is used only if the expiry time cannot be determined from any other source. It is applicable only to the following status codes: 307, 403, 404, and 410. Maximum value: 31536000
hitParams Parameters to use for parameterized hit evaluation of an object. Up to 128 parameters can be specified. Mutually exclusive with the Hit Selector parameter.
invalParams Parameters for parameterized invalidation of an object. You can specify up to 8 parameters. Mutually exclusive with invalSelector.
ignoreParamValueCase Ignore case when comparing parameter values during parameterized hit evaluation. (Parameter value case is ignored by default during parameterized invalidation.)
Possible values: YES, NO
matchCookies Evaluate for parameters in the cookie header also.
Possible values: YES, NO
invalRestrictedToHost Take the host header into account during parameterized invalidation.
Possible values: YES, NO
pollEveryTime Always poll for the objects in this content group. That is, retrieve the objects from the origin server whenever they are requested.
Possible values: YES, NO Default value: NO
ignoreReloadReq Ignore any request to reload a cached object from the origin server. To guard against Denial of Service attacks, set this parameter to YES. For RFC-compliant behavior, set it to NO.
Possible values: YES, NO Default value: YES
removeCookies Remove cookies from responses.
Possible values: YES, NO Default value: YES
prefetch Attempt to refresh objects that are about to go stale.
Possible values: YES, NO Default value: YES
prefetchPeriod Time period, in seconds before an object’s calculated expiry time, during which to attempt prefetch. Default value: -1 Maximum value: 4294967294
prefetchPeriodMilliSec Time period, in milliseconds before an object’s calculated expiry time, during which to attempt prefetch. Default value: -1 Maximum value: 4294967290
prefetchMaxPending Maximum number of outstanding prefetches that can be queued for the content group. Minimum value: 0 Maximum value: 4294967294
flashCache Perform flash cache. Mutually exclusive with Poll Every Time (PET) on the same content group.
Possible values: YES, NO Default value: NO
expireAtLastByte Force expiration of the content immediately after the response is downloaded (upon receipt of the last byte of the response body). Applicable only to positive responses.
Possible values: YES, NO Default value: NO
insertVia Insert a Via header into the response.
Possible values: YES, NO Default value: YES
insertAge Insert an Age header into the response. An Age header contains information about the age of the object, in seconds, as calculated by the integrated cache.
Possible values: YES, NO Default value: YES
insertETag Insert an ETag header in the response. With ETag header insertion, the integrated cache does not serve full responses on repeat requests.
Possible values: YES, NO Default value: YES
cacheControl Insert a Cache-Control header into the response.
quickAbortSize If the size of an object that is being downloaded is less than or equal to the quick abort value, and a client aborts during the download, the cache stops downloading the response. If the object is larger than the quick abort size, the cache continues to download the response. Maximum value: 4194303
minResSize Minimum size of a response that can be cached in this content group. Default minimum response size is 0. Maximum value: 2097151
maxResSize Maximum size of a response that can be cached in this content group. Default value: 80 Maximum value: 2097151
memLimit Maximum amount of memory that the cache can use. The effective limit is based on the available memory of the Citrix ADC. Default value: 65536
ignoreReqCachingHdrs Ignore Cache-Control and Pragma headers in the incoming request.
Possible values: YES, NO Default value: YES
minHits Number of hits that qualifies a response for storage in this content group.
alwaysEvalPolicies Force policy evaluation for each response arriving from the origin server. Cannot be set to YES if the Prefetch parameter is also set to YES.
Possible values: YES, NO Default value: NO
persistHA The option for IC objects to save objects to Secondary in a HA deployment. Set YES for IC to take this state.
Possible values: YES, NO Default value: NO
pinned The option for IC from flushing objects from this contentgroup under memory pressure. Set YES for IC to take this state.
Possible values: YES, NO Default value: NO
lazyDnsResolve Perform DNS resolution for responses only if the destination IP address in the request does not match the destination IP address of the cached response.
Possible values: YES, NO Default value: YES
hitSelector Selector for evaluating whether an object gets stored in a particular content group. A selector is an abstraction for a collection of PIXL expressions.
invalSelector Selector for invalidating objects in the content group. A selector is an abstraction for a collection of PIXL expressions.
expire cache contentGroup
Forces expiration of all the objects in the specified content group. The next request for any object in the group is sent to the origin server.
Synopsis
expire cache contentGroup
Arguments
name Name of the content group whose objects are to be expired.
unset cache contentGroup
Use this command to remove cache contentGroup settings.Refer to the set cache contentGroup command for meanings of the arguments.
Synopsis
unset cache contentGroup
rm cache contentGroup
Removes the specified content group. Before removing, make sure that no cache policy has its storeInGroup attribute set to this group, otherwise the group cannot be removed.
Synopsis
rm cache contentGroup
Arguments
name Name of the content group to be removed.
stat cache contentGroup
Displays a summary of cache group statistics.
Synopsis
stat cache contentGroup [
Arguments
name Name of the cache contentgroup for which to display statistics. If you do not set this parameter, statistics are shown for all cache contentgroups.
detail Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.
fullValues Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated
ntimes The number of times, in intervals of seven seconds, the statistics should be displayed. Default value: 1 Minimum value: 0
logFile The name of the log file to be used as input.
clearstats Clear the statsistics / counters
Possible values: basic, full
Output
count devno stateflag
Counters
non304 Hits for Content group (non304hit) Non304 hits for ContentGroup
304 Hits for Content group (304hit) 304 hits for ContentGroup
Number of objects in contentgroup (cell) Number of objects in contentgroup
Number of marker objects in contentgroup (Mrkcell) Number of marker objects in contentgroup
Number of times contentgroup is flushed (flushed) Number of times contentgroup is flushed
current memory usage (CurMem) current memory usage
maximum memory usage limit (MaxMem) maximum memory usage limit
Example
stat cache contentgroup
Related Commands
flush cache contentGroup
Flush the objects in the specified content group.
Synopsis
flush cache contentGroup
Arguments
name Name of the content group from which to flush objects, or “all” to flush all content groups.
query Query string specifying individual objects to flush from this group by using parameterized invalidation. If this parameter is not set, all objects are flushed from the group.
host Flush only objects that belong to the specified host. Do not use except with parameterized invalidation. Also, the Invalidation Restricted to Host parameter for the group must be set to YES.
selectorValue Value of the selector to be used for flushing objects from the content group. Requires that an invalidation selector be configured for the content group.
add cache contentGroup
Creates a new content group for grouping cached objects on the basis of some unique property.
Synopsis
add cache contentGroup
Arguments
name Name for the content group. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the content group is created.
weakPosRelExpiry Relative expiry time, in seconds, for expiring positive responses with response codes between 200 and 399. Cannot be used in combination with other Expiry attributes. Similar to -relExpiry but has lower precedence. Default value: -1 Maximum value: 31536000
heurExpiryParam Heuristic expiry time, in percent of the duration, since the object was last modified. Default value: -1 Minimum value: 0 Maximum value: 100
relExpiry Relative expiry time, in seconds, after which to expire an object cached in this content group. Default value: -1 Maximum value: 31536000
relExpiryMilliSec Relative expiry time, in milliseconds, after which to expire an object cached in this content group. Default value: -1 Maximum value: 86400000
absExpiry Local time, up to 4 times a day, at which all objects in the content group must expire.
CLI Users:
For example, to specify that the objects in the content group should expire by 11:00 PM, type the following command: add cache contentgroup
absExpiryGMT Coordinated Universal Time (GMT), up to 4 times a day, when all objects in the content group must expire.
weakNegRelExpiry Relative expiry time, in seconds, for expiring negative responses. This value is used only if the expiry time cannot be determined from any other source. It is applicable only to the following status codes: 307, 403, 404, and 410. Default value: -1 Maximum value: 31536000
hitParams Parameters to use for parameterized hit evaluation of an object. Up to 128 parameters can be specified. Mutually exclusive with the Hit Selector parameter.
invalParams Parameters for parameterized invalidation of an object. You can specify up to 8 parameters. Mutually exclusive with invalSelector.
ignoreParamValueCase Ignore case when comparing parameter values during parameterized hit evaluation. (Parameter value case is ignored by default during parameterized invalidation.)
Possible values: YES, NO Default value: VAL_NOT_SET
matchCookies Evaluate for parameters in the cookie header also.
Possible values: YES, NO Default value: VAL_NOT_SET
invalRestrictedToHost Take the host header into account during parameterized invalidation.
Possible values: YES, NO Default value: VAL_NOT_SET
pollEveryTime Always poll for the objects in this content group. That is, retrieve the objects from the origin server whenever they are requested.
Possible values: YES, NO Default value: NO
ignoreReloadReq Ignore any request to reload a cached object from the origin server. To guard against Denial of Service attacks, set this parameter to YES. For RFC-compliant behavior, set it to NO.
Possible values: YES, NO Default value: YES
removeCookies Remove cookies from responses.
Possible values: YES, NO Default value: YES
prefetch Attempt to refresh objects that are about to go stale.
Possible values: YES, NO Default value: YES
prefetchPeriod Time period, in seconds before an object’s calculated expiry time, during which to attempt prefetch. Default value: -1 Maximum value: 4294967294
prefetchPeriodMilliSec Time period, in milliseconds before an object’s calculated expiry time, during which to attempt prefetch. Default value: -1 Maximum value: 4294967290
prefetchMaxPending Maximum number of outstanding prefetches that can be queued for the content group. Default value: -1 Minimum value: 0 Maximum value: 4294967294
flashCache Perform flash cache. Mutually exclusive with Poll Every Time (PET) on the same content group.
Possible values: YES, NO Default value: NO
expireAtLastByte Force expiration of the content immediately after the response is downloaded (upon receipt of the last byte of the response body). Applicable only to positive responses.
Possible values: YES, NO Default value: NO
insertVia Insert a Via header into the response.
Possible values: YES, NO Default value: YES
insertAge Insert an Age header into the response. An Age header contains information about the age of the object, in seconds, as calculated by the integrated cache.
Possible values: YES, NO Default value: YES
insertETag Insert an ETag header in the response. With ETag header insertion, the integrated cache does not serve full responses on repeat requests.
Possible values: YES, NO Default value: YES
cacheControl Insert a Cache-Control header into the response.
quickAbortSize If the size of an object that is being downloaded is less than or equal to the quick abort value, and a client aborts during the download, the cache stops downloading the response. If the object is larger than the quick abort size, the cache continues to download the response. Default value: 4194303 Maximum value: 4194303
minResSize Minimum size of a response that can be cached in this content group. Default minimum response size is 0. Maximum value: 2097151
maxResSize Maximum size of a response that can be cached in this content group. Default value: 80 Maximum value: 2097151
memLimit Maximum amount of memory that the cache can use. The effective limit is based on the available memory of the Citrix ADC. Default value: 65536
ignoreReqCachingHdrs Ignore Cache-Control and Pragma headers in the incoming request.
Possible values: YES, NO Default value: YES
minHits Number of hits that qualifies a response for storage in this content group. Default value: 0
alwaysEvalPolicies Force policy evaluation for each response arriving from the origin server. Cannot be set to YES if the Prefetch parameter is also set to YES.
Possible values: YES, NO Default value: NO
persistHA Setting persistHA to YES causes IC to save objects in contentgroup to Secondary node in HA deployment.
Possible values: YES, NO Default value: NO
pinned Do not flush objects from this content group under memory pressure.
Possible values: YES, NO Default value: NO
lazyDnsResolve Perform DNS resolution for responses only if the destination IP address in the request does not match the destination IP address of the cached response.
Possible values: YES, NO Default value: YES
hitSelector Selector for evaluating whether an object gets stored in a particular content group. A selector is an abstraction for a collection of PIXL expressions.
invalSelector Selector for invalidating objects in the content group. A selector is an abstraction for a collection of PIXL expressions.
type The type of the content group.
Possible values: HTTP, MYSQL, MSSQL Default value: HTTP