ADC CLI Commands

help

August 18, 2023

Contributed by:

The following operations can be performed on “help”:

help

Use this command to display help information for a CLI command, for a group of commands, or for all CLI commands.

Synopsis

help [(commandName)

-all]

Arguments

commandName The name of a command for which you want full usage information.

groupName The name of a command group for which you want basic usage information.

all Use this option to request basic usage information for all commands.

Example

1.To view help information for adding a virtual server, enter the following CLI command: help add vserver The following information is displayed: Usage: add vserver \[ port>] \[-type \( CONTENT | ADDRESS )] \[-cacheType ] \[-backupVServerName ] \[-redirectURL ] \[-cacheable \( ON | OFF )] \[-state \( ENABLED | DISABLED )]

where: serviceType = ( HTTP | FTP | TCP | UDP | SSL | SSL_BRIDGE | SSL_TCP | NNTP| DNS | ANY )

= \( TRANSPARENT | REVERSE | FORWARD ) Done 2.To view help information for all DNS commands, enter the following command: help dns The following information is displayed: add aaaaRec ... [-TTL ] rm aaaaRec [ ...] show aaaaRec \[ | -type ] add addRec ... [-TTL ] [-private ] rm addRec [ ...] show addRec \[ | -type ] add cnameRec [-TTL ] rm cnameRec show cnameRec \[ | -type ] add mxRec -mx -pref [-TTL ] rm mxRec set mxRec -mx [-pref ] [-TTL ] show mxRec \[ | -type ] add nsRec [-p ] [-s ] [-TTL ] rm nsRec \[-p | -s ] show nsRec \[ | -type ] set dns parameter \[-timeout ] \[-retries <positive\_integer>] \[-minTTL ] \[-maxTTL ] \[-TTL \( ENABLED | DISABLED )] \[-cacheRecords \( YES | NO )] show dns parameter add soaRec -contact -serial -refresh -retry -expire -minimum -TTL rm soaRec set soaRec [-contact ] [-serial ][-refresh ] [-retry ] [-expire ] [-minimum ][-TTL ] show soaRec \[ | -type ] add dns ptrRec ... [-TTL ] rm dns ptrRec [ ...] show dns ptrRec \[ | -type ] add dns srvRec -priority -weight -port rm dns srvRec [ ...] set dns srvRec [-priority ] [-weight ] [-port ] [-TTL ] show dns srvRec \[\( \[]) | -type ] Done

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

help

August 18, 2023

Contributed by:

August 18, 2023

Contributed by:

help

help

Synopsis

Arguments

Example

In this article