ADC CLI Commands

lb-group

The following operations can be performed on “lb-group”:

rm unbind show set add unset bind rename

rm lb group

Removes the lb group

Synopsis

rm lb group @ ...

Arguments

name Name of the lb group to delete.

Example

rm lb group lb_grp1

unbind lb group

Unbinds one or more virtual servers from a group.

Synopsis

unbind lb group @ ...

Arguments

name Name of the load balancing virtual server group.

vServerName Name of the virtual server to unbind. Multiple names can be specified.

Example

unbind lb group webgroup http_vip To unbind multiple vservers use the following command: unbind lb group webgroup v[1-3]

show lb group

Displays the virtual servers bound to the specified group.

Synopsis

show lb group []

Arguments

name Name of the load balancing virtual server group.

Output

vServerName Virtual server name.

persistenceType The type of the persistence set for the group.

persistenceBackup The type of the backup persistence set for the group.

backupPersistenceTimeout Time period, in minutes, for which backup persistence is in effect.

persistMask The netmask applied for ipv4 traffic when the persistency type is SOURCEIP.

v6persistmasklen The netmask applied for ipv6 traffic when the persistency type is SOURCEIP.

cookieName Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.

cookieDomain Domain attribute for the HTTP cookie.

timeout Time period for which a persistence session is in effect.

rule Rule type.

td Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

stateflag useVserverPersistency Use this parameter to enable vserver level persistence on group members. This allows member vservers to have their own persistence, but need to be compatible with other members persistence rules. When this setting is enabled persistence sessions created by any of the members can be shared by other member vservers.

masterVserver When USE_VSERVER_PERSISTENCE is enabled, one can use this setting to designate a member vserver as master which is responsible to create the persistence sessions

devno count

Example

show lb group webgrp

set lb group

Configures persistence for the specified load balancing group. The persistence settings are applied to all the members of the group.

Synopsis

set lb group @ \[-persistenceType ] \[-persistenceBackup \( SOURCEIP | NONE )] \[-backupPersistenceTimeout ] \[-persistMask ] \[-cookieName ] \[-v6persistmasklen <positive\_integer>] \[-cookieDomain ] \[-timeout ] \[-rule ] \[-useVserverPersistency \( ENABLED | DISABLED )] \[-masterVserver ]

Arguments

name Name of the load balancing virtual server group.

persistenceType Type of persistence for the group. Available settings function as follows:

  • SOURCEIP - Create persistence sessions based on the client IP.
  • COOKIEINSERT - Create persistence sessions based on a cookie in client requests. The cookie is inserted by a Set-Cookie directive from the server, in its first response to a client.
  • RULE - Create persistence sessions based on a user defined rule.
  • NONE - Disable persistence for the group.

Possible values: SOURCEIP, COOKIEINSERT, RULE, NONE

persistenceBackup Type of backup persistence for the group.

Possible values: SOURCEIP, NONE

backupPersistenceTimeout Time period, in minutes, for which backup persistence is in effect. Default value: 2 Minimum value: 2 Maximum value: 1440

persistMask Persistence mask to apply to source IPv4 addresses when creating source IP based persistence sessions. Default value: 0xFFFFFFFF

cookieName Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.

v6persistmasklen Persistence mask to apply to source IPv6 addresses when creating source IP based persistence sessions. Default value: 128 Minimum value: 1 Maximum value: 128

cookieDomain Domain attribute for the HTTP cookie.

timeout Time period for which a persistence session is in effect. Default value: 2 Maximum value: 1440

rule Expression, or name of a named expression, against which traffic is evaluated.

The following requirements apply only to the Citrix ADC CLI:

  • If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
  • If the expression itself includes double quotation marks, escape the quotations by using the \ character.
  • Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks. Default value: “None”

useVserverPersistency Use this parameter to enable vserver level persistence on group members. This allows member vservers to have their own persistence, but need to be compatible with other members persistence rules. When this setting is enabled persistence sessions created by any of the members can be shared by other member vservers.

Possible values: ENABLED, DISABLED Default value: DISABLED

masterVserver When USE_VSERVER_PERSISTENCE is enabled, one can use this setting to designate a member vserver as master which is responsible to create the persistence sessions

Example

set lb group webgrp -persistenceType COOKIEINSERT To set the persistence type for multiple groups use the following command: set lb group webgrp[1-3] -persistenceType COOKIEINSERT

add lb group

Adds lb group entity

Synopsis

add lb group @ \[-persistenceType ] \[-persistenceBackup \( SOURCEIP | NONE )] \[-backupPersistenceTimeout ] \[-persistMask ] \[-cookieName ] \[-v6persistmasklen <positive\_integer>] \[-cookieDomain ] \[-timeout ] \[-rule ] \[-masterVserver ] \[-useVserverPersistency \( ENABLED | DISABLED )]

Arguments

name Name of the load balancing virtual server group.

persistenceType Type of persistence for the group. Available settings function as follows:

  • SOURCEIP - Create persistence sessions based on the client IP.
  • COOKIEINSERT - Create persistence sessions based on a cookie in client requests. The cookie is inserted by a Set-Cookie directive from the server, in its first response to a client.
  • RULE - Create persistence sessions based on a user defined rule.
  • NONE - Disable persistence for the group.

Possible values: SOURCEIP, COOKIEINSERT, RULE, NONE

persistenceBackup Type of backup persistence for the group.

Possible values: SOURCEIP, NONE

backupPersistenceTimeout Time period, in minutes, for which backup persistence is in effect. Default value: 2 Minimum value: 2 Maximum value: 1440

persistMask Persistence mask to apply to source IPv4 addresses when creating source IP based persistence sessions. Default value: 0xFFFFFFFF

cookieName Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.

v6persistmasklen Persistence mask to apply to source IPv6 addresses when creating source IP based persistence sessions. Default value: 128 Minimum value: 1 Maximum value: 128

cookieDomain Domain attribute for the HTTP cookie.

timeout Time period for which a persistence session is in effect. Default value: 2 Maximum value: 1440

rule Expression, or name of a named expression, against which traffic is evaluated.

The following requirements apply only to the Citrix ADC CLI:

  • If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
  • If the expression itself includes double quotation marks, escape the quotations by using the \ character.
  • Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks. Default value: “None”

masterVserver When USE_VSERVER_PERSISTENCE is enabled, one can use this setting to designate a member vserver as master which is responsible to create the persistence sessions

useVserverPersistency Use this parameter to enable vserver level persistence on group members. This allows member vservers to have their own persistence, but need to be compatible with other members persistence rules. When this setting is enabled persistence sessions created by any of the members can be shared by other member vservers.

Possible values: ENABLED, DISABLED Default value: DISABLED

unset lb group

Use this command to remove lb group settings.Refer to the set lb group command for meanings of the arguments.

Synopsis

unset lb group @ [-persistenceType] [-persistenceBackup] [-backupPersistenceTimeout] [-persistMask] [-cookieName] [-v6persistmasklen] [-cookieDomain] [-timeout] [-rule] [-useVserverPersistency] [-masterVserver]

bind lb group

Binds one or more virtual servers to a load balancing virtual server group. If the specified group does not exist, the Citrix ADC first creates the group, and then binds the virtual servers to it. A virtual server group enables you to specify common persistence settings for all of its members through a single set lb group command. Only address-based virtual servers can be added to a group. Content-based virtual servers (content switching and cache redirection virtual servers) cannot be added. A virtual server can be assigned to only one group at any given time. To move a virtual server from one group to another, the virtual server must first be unbound from the group to which it belongs.

Synopsis

bind lb group @ @ ...

Arguments

name Name for the load balancing virtual server group. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Can be changed after the virtual server is created.

CLI Users: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my lbgroup” or ‘my lbgroup’).

vServerName Name of the virtual server to bind to the group. Multiple names can be specified.

Example

bind lb group webgrp http_vip To bind multiple vservers to a group use the following command: bind lb group webgrp v[1-4] To bind vserver v1 to group webgrp1, v2 to webgrp2 and v3 to webgrp3, use the following command: bind lb group webgrp[1-3] v[1-3]

rename lb group

Renames a load balancing virtual server group.

Synopsis

rename lb group @ @

Arguments

name Existing name of the load balancing virtual server group.

newName New name for the load balancing virtual server group.

Example

rename lb group gv1 gv-new1

lb-group