ADC CLI Commands

authentication-tacacsAction

The following operations can be performed on “authentication-tacacsAction”:

add show unset set rm

add authentication tacacsAction

Creates an action (profile) for a TACACS+ server. The profile contains all configuration data necessary to communicate with that TACACS+ server.

Synopsis

add authentication tacacsAction \[-serverIP <ip\_addr|ipv6\_addr|\*>] \[-serverPort ] \[-authTimeout <positive\_integer>] {-tacacsSecret } \[-authorization \( ON | OFF )] \[-accounting \( ON | OFF )] \[-auditFailedCmds \( ON | OFF )] \[-groupAttrName ] \[-defaultAuthenticationGroup ] \[-Attribute1 ] \[-Attribute2 ] \[-Attribute3 ] \[-Attribute4 ] \[-Attribute5 ] \[-Attribute6 ] \[-Attribute7 ] \[-Attribute8 ] \[-Attribute9 ] \[-Attribute10 ] \[-Attribute11 ] \[-Attribute12 ] \[-Attribute13 ] \[-Attribute14 ] \[-Attribute15 ] \[-Attribute16 ] \[-Attributes ]

Arguments

name Name for the TACACS+ profile (action). Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after TACACS profile is created.

The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication action” or ‘y authentication action’).

serverIP IP address assigned to the TACACS+ server.

serverPort Port number on which the TACACS+ server listens for connections. Default value: 49 Minimum value: 1

authTimeout Number of seconds the Citrix ADC waits for a response from the TACACS+ server. Default value: 3 Minimum value: 1

tacacsSecret Key shared between the TACACS+ server and the Citrix ADC. Required for allowing the Citrix ADC to communicate with the TACACS+ server.

authorization Use streaming authorization on the TACACS+ server.

Possible values: ON, OFF

accounting Whether the TACACS+ server is currently accepting accounting messages.

Possible values: ON, OFF

auditFailedCmds The state of the TACACS+ server that will receive accounting messages.

Possible values: ON, OFF

groupAttrName TACACS+ group attribute name. Used for group extraction on the TACACS+ server.

defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Attribute1 Name of the custom attribute to be extracted from server and stored at index ‘1’ (where ‘1’ changes for each attribute)

Attribute2 Name of the custom attribute to be extracted from server and stored at index ‘2’ (where ‘2’ changes for each attribute)

Attribute3 Name of the custom attribute to be extracted from server and stored at index ‘3’ (where ‘3’ changes for each attribute)

Attribute4 Name of the custom attribute to be extracted from server and stored at index ‘4’ (where ‘4’ changes for each attribute)

Attribute5 Name of the custom attribute to be extracted from server and stored at index ‘5’ (where ‘5’ changes for each attribute)

Attribute6 Name of the custom attribute to be extracted from server and stored at index ‘6’ (where ‘6’ changes for each attribute)

Attribute7 Name of the custom attribute to be extracted from server and stored at index ‘7’ (where ‘7’ changes for each attribute)

Attribute8 Name of the custom attribute to be extracted from server and stored at index ‘8’ (where ‘8’ changes for each attribute)

Attribute9 Name of the custom attribute to be extracted from server and stored at index ‘9’ (where ‘9’ changes for each attribute)

Attribute10 Name of the custom attribute to be extracted from server and stored at index ‘10’ (where ‘10’ changes for each attribute)

Attribute11 Name of the custom attribute to be extracted from server and stored at index ‘11’ (where ‘11’ changes for each attribute)

Attribute12 Name of the custom attribute to be extracted from server and stored at index ‘12’ (where ‘12’ changes for each attribute)

Attribute13 Name of the custom attribute to be extracted from server and stored at index ‘13’ (where ‘13’ changes for each attribute)

Attribute14 Name of the custom attribute to be extracted from server and stored at index ‘14’ (where ‘14’ changes for each attribute)

Attribute15 Name of the custom attribute to be extracted from server and stored at index ‘15’ (where ‘15’ changes for each attribute)

Attribute16 Name of the custom attribute to be extracted from server and stored at index ‘16’ (where ‘16’ changes for each attribute)

Attributes List of attribute names separated by ‘,’ which needs to be fetched from tacacs server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session

show authentication tacacsAction

Displays the current configuration settings for the specified TACACS+ profile (action).

Synopsis

show authentication tacacsAction []

Arguments

name Name of the TACACS+ profile.

Output

serverIP IP address assigned to the TACACS+ server.

serverPort Port number on which the TACACS+ server listens for connections.

authTimeout Number of seconds the Citrix ADC waits for a response from the TACACS+ server.

tacacsSecret Key shared between the TACACS+ server and the Citrix ADC. Required for allowing the Citrix ADC to communicate with the TACACS+ server.

authorization Use streaming authorization on the TACACS+ server.

accounting Whether the TACACS+ server is currently accepting accounting messages.

auditFailedCmds The state of the TACACS+ server that will receive accounting messages.

groupAttrName TACACS+ group attribute name. Used for group extraction on the TACACS+ server.

Success Failure defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

stateflag Attribute1 Name of the custom attribute to be extracted from server and stored at index ‘1’ (where ‘1’ changes for each attribute)

Attribute2 Name of the custom attribute to be extracted from server and stored at index ‘2’ (where ‘2’ changes for each attribute)

Attribute3 Name of the custom attribute to be extracted from server and stored at index ‘3’ (where ‘3’ changes for each attribute)

Attribute4 Name of the custom attribute to be extracted from server and stored at index ‘4’ (where ‘4’ changes for each attribute)

Attribute5 Name of the custom attribute to be extracted from server and stored at index ‘5’ (where ‘5’ changes for each attribute)

Attribute6 Name of the custom attribute to be extracted from server and stored at index ‘6’ (where ‘6’ changes for each attribute)

Attribute7 Name of the custom attribute to be extracted from server and stored at index ‘7’ (where ‘7’ changes for each attribute)

Attribute8 Name of the custom attribute to be extracted from server and stored at index ‘8’ (where ‘8’ changes for each attribute)

Attribute9 Name of the custom attribute to be extracted from server and stored at index ‘9’ (where ‘9’ changes for each attribute)

Attribute10 Name of the custom attribute to be extracted from server and stored at index ‘10’ (where ‘10’ changes for each attribute)

Attribute11 Name of the custom attribute to be extracted from server and stored at index ‘11’ (where ‘11’ changes for each attribute)

Attribute12 Name of the custom attribute to be extracted from server and stored at index ‘12’ (where ‘12’ changes for each attribute)

Attribute13 Name of the custom attribute to be extracted from server and stored at index ‘13’ (where ‘13’ changes for each attribute)

Attribute14 Name of the custom attribute to be extracted from server and stored at index ‘14’ (where ‘14’ changes for each attribute)

Attribute15 Name of the custom attribute to be extracted from server and stored at index ‘15’ (where ‘15’ changes for each attribute)

Attribute16 Name of the custom attribute to be extracted from server and stored at index ‘16’ (where ‘16’ changes for each attribute)

Attributes List of attribute names separated by ‘,’ which needs to be fetched from tacacs server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session

devno count

unset authentication tacacsAction

Use this command to remove authentication tacacsAction settings.Refer to the set authentication tacacsAction command for meanings of the arguments.

Synopsis

unset authentication tacacsAction [-serverIP] [-serverPort] [-authTimeout] [-tacacsSecret] [-authorization] [-accounting] [-auditFailedCmds] [-groupAttrName] [-defaultAuthenticationGroup] [-Attribute1] [-Attribute2] [-Attribute3] [-Attribute4] [-Attribute5] [-Attribute6] [-Attribute7] [-Attribute8] [-Attribute9] [-Attribute10] [-Attribute11] [-Attribute12] [-Attribute13] [-Attribute14] [-Attribute15] [-Attribute16] [-Attributes]

set authentication tacacsAction

Modifies a TACACS+ server profile (action).

Synopsis

set authentication tacacsAction \[-serverIP <ip\_addr|ipv6\_addr|\*>] \[-serverPort ] \[-authTimeout <positive\_integer>] {-tacacsSecret } \[-authorization \( ON | OFF )] \[-accounting \( ON | OFF )] \[-auditFailedCmds \( ON | OFF )] \[-groupAttrName ] \[-defaultAuthenticationGroup ] \[-Attribute1 ] \[-Attribute2 ] \[-Attribute3 ] \[-Attribute4 ] \[-Attribute5 ] \[-Attribute6 ] \[-Attribute7 ] \[-Attribute8 ] \[-Attribute9 ] \[-Attribute10 ] \[-Attribute11 ] \[-Attribute12 ] \[-Attribute13 ] \[-Attribute14 ] \[-Attribute15 ] \[-Attribute16 ] \[-Attributes ]

Arguments

name Name of the TACACS+ profile to modify.

serverIP IP address assigned to the TACACS+ server.

serverPort Port number on which the TACACS+ server listens for connections. Default value: 49 Minimum value: 1

authTimeout Number of seconds the Citrix ADC waits for a response from the TACACS+ server. Default value: 3 Minimum value: 1

tacacsSecret Key shared between the TACACS+ server and the Citrix ADC. Required for allowing the Citrix ADC to communicate with the TACACS+ server.

authorization Use streaming authorization on the TACACS+ server.

Possible values: ON, OFF

accounting Whether the TACACS+ server is currently accepting accounting messages.

Possible values: ON, OFF

auditFailedCmds The state of the TACACS+ server that will receive accounting messages.

Possible values: ON, OFF

groupAttrName TACACS+ group attribute name. Used for group extraction on the TACACS+ server.

defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Attribute1 Name of the custom attribute to be extracted from server and stored at index ‘1’ (where ‘1’ changes for each attribute)

Attribute2 Name of the custom attribute to be extracted from server and stored at index ‘2’ (where ‘2’ changes for each attribute)

Attribute3 Name of the custom attribute to be extracted from server and stored at index ‘3’ (where ‘3’ changes for each attribute)

Attribute4 Name of the custom attribute to be extracted from server and stored at index ‘4’ (where ‘4’ changes for each attribute)

Attribute5 Name of the custom attribute to be extracted from server and stored at index ‘5’ (where ‘5’ changes for each attribute)

Attribute6 Name of the custom attribute to be extracted from server and stored at index ‘6’ (where ‘6’ changes for each attribute)

Attribute7 Name of the custom attribute to be extracted from server and stored at index ‘7’ (where ‘7’ changes for each attribute)

Attribute8 Name of the custom attribute to be extracted from server and stored at index ‘8’ (where ‘8’ changes for each attribute)

Attribute9 Name of the custom attribute to be extracted from server and stored at index ‘9’ (where ‘9’ changes for each attribute)

Attribute10 Name of the custom attribute to be extracted from server and stored at index ‘10’ (where ‘10’ changes for each attribute)

Attribute11 Name of the custom attribute to be extracted from server and stored at index ‘11’ (where ‘11’ changes for each attribute)

Attribute12 Name of the custom attribute to be extracted from server and stored at index ‘12’ (where ‘12’ changes for each attribute)

Attribute13 Name of the custom attribute to be extracted from server and stored at index ‘13’ (where ‘13’ changes for each attribute)

Attribute14 Name of the custom attribute to be extracted from server and stored at index ‘14’ (where ‘14’ changes for each attribute)

Attribute15 Name of the custom attribute to be extracted from server and stored at index ‘15’ (where ‘15’ changes for each attribute)

Attribute16 Name of the custom attribute to be extracted from server and stored at index ‘16’ (where ‘16’ changes for each attribute)

Attributes List of attribute names separated by ‘,’ which needs to be fetched from tacacs server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session

rm authentication tacacsAction

Removes a TACACS+ profile (action). A profile cannot be removed as long as it is bound to a policy.

Synopsis

rm authentication tacacsAction

Arguments

name Name of the profile to be removed.

authentication-tacacsAction