-
-
-
-
-
lsn-client
-
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
lsn-client
The following operations can be performed on “lsn-client”:
| show | bind | unbind | rm | add |
show lsn client
Display LSN Client. NOTE: This command is deprecated.LSN related configuration commands are being deprecated will be removed in a future release
Synopsis
Arguments
clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn client1” or ‘lsn client1’).
Output
network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
netmask Subnet mask for the IPv4 address specified in the Network parameter.
td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain.
aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.
acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.
network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
clientType This field stores the type of lsn client. Initially it will be UNSET. Once network/acl is bound, appropriate type will be decided. Primarily useful in DB validation case.
devno count stateflag
Example
show lsn client client1
bind lsn client
Bind LSN Client with client network or host. There can be a maximum of 1 million LSN subscribers globally. NOTE: This command is deprecated.LSN related configuration commands are being deprecated will be removed in a future release
Synopsis
Arguments
clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn client1” or ‘lsn client1’).
network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
netmask Subnet mask for the IPv4 address specified in the Network parameter. Default value: 0xFFFFFFFF
aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.
acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.
network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain. Default value: 0 Minimum value: 0 Maximum value: 4094
Example
bind lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0
unbind lsn client
Unbind LSN Client with client network or host. NOTE: This command is deprecated.LSN related configuration commands are being deprecated will be removed in a future release
Synopsis
Arguments
clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn client1” or ‘lsn client1’).
network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
netmask Subnet mask for the IPv4 address specified in the Network parameter. Default value: 0xFFFFFFFF
aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.
acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.
network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.
td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain. Default value: 0 Minimum value: 0 Maximum value: 4094
Example
unbind lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0
rm lsn client
Remove LSN Client. NOTE: This command is deprecated.LSN related configuration commands are being deprecated will be removed in a future release
Synopsis
Arguments
clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn client1” or ‘lsn client1’).
Example
rm lsn client client1
add lsn client
Add LSN Client. NOTE: This command is deprecated.LSN related configuration commands are being deprecated will be removed in a future release
Synopsis
Arguments
clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn client1” or ‘lsn client1’).
Example
add lsn client client1
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.