Citrix ADC 12.1 NITRO API Reference

mapdmr

Configuration for MAP-T Default Mapping rule resource.

Properties

(click to see Operations)

Name Data Type Permissions Description
name Read-write Name for the Default Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Default Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “add network MapDmr map1 -BRIpv6Prefix 2003::/96”).
Default Mapping Rule (DMR) is defined in terms of the IPv6 prefix advertised by one or more BRs, which provide external connectivity. A typical MAP-T CE will install an IPv4 default route using this rule. A BR will use this rule when translating all outside IPv4 source addresses to the IPv6 MAP domain.
Minimum length = 1
Maximum length = 127
bripv6prefix Read-write IPv6 prefix of Border Relay (Citrix ADC) device.MAP-T CE will send ipv6 packets to this ipv6 prefix.The DMR IPv6 prefix length SHOULD be 64 bits long by default and in any case MUST NOT exceed 96 bits.
__count Read-only count parameter

Operations

(click to see Properties)

ADD DELETE GET (ALL) GET COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"mapdmr":{
<b>"name":<String_value>,
</b><b>"bripv6prefix":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of mapdmr resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr?pagesize=#no;pageno=#no

Use this query-parameter to get the mapdmr resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapdmr": [ {
"name":<String_value>,
"bripv6prefix":<String_value>
}]}

<!--NeedCopy-->

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapdmr": [ {
"name":<String_value>,
"bripv6prefix":<String_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapdmr?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapdmr": [ { "__count": "#no"} ] }

<!--NeedCopy-->
mapdmr