Citrix ADC 12.1 NITRO API Reference

0x300 ERRORS

August 17, 2023

Contributed by:

0x300 ERRORS

Error Code	Error Code(Decimal)	Error Code(Hex)	Error Message
NSERR_RNAT_INV	769	0x301	Reverse NAT not applicable for default route.
NSERR_INVALID_IF	770	0x302	Invalid interface name/number.
NSERR_MGRLIMIT_REACHED	771	0x303	Maximum manager limit reached.
NSERR_SP_INVALD_TABLE	772	0x304	SP table entries should be in increasing order.
NSERR_RNAT_NATIP_EXISTS	773	0x305	RNAT to the target network with specified NAT IP already exists.
NSERR_RNAT_EXISTS	774	0x306	ACL or NETWORK based RNAT rule already exists.
NSERR_RNAT_NOT_EXISTS	775	0x307	ACL or NETWORK based RNAT rule does not exist.
NSERR_RNAT_NATIP_NOT_EXISTS	776	0x308	RNAT to the target network with specified NAT IP doesnt exist.
NSERR_RNAT_INVALID_NATIP	777	0x309	NAT IP is not valid.
NSERR_RNAT_XACLWITHTTL	778	0x30a	Acl with ttl can not be used in NAT64/RNAT/RNAT6/ForwardingSession/LSN rule.
NSERR_ARP_DISABLED	784	0x310	IP has arp disabled.
NSERR_ARP_SEC_NOT_OWNEDIP	785	0x311	Secondary can not arp for this IP.
NSERR_CPE_RULE_INVAL	786	0x312	Invalid rule.
NSERR_INVAL_FLOWTYPE	787	0x313	Only authorization, audit, VPN session and traffic policies can be bound to aaa user or group.
NSERR_INVAL_POLICY_TYPE	788	0x314	Response rule is invalid in an authorization policy.
NSERR_CPE_RULE_ACTION_INVAL	789	0x315	Request action is valid only for request rule.
NSERR_CPE_DEF_SET_INVAL	790	0x316	Default policy cannot be set.
NSERR_INVAL_FORCECLEANUP	791	0x317	Invalid forcecleanup value.
NSERR_INVAL_AAA_GROUP	792	0x318	Invalid authorizationgroup value.
NSERR_INVAL_PROXY	793	0x319	Invalid allprotocolproxy value.
NSERR_INVAL_HTTTPPROXY	800	0x320	Invalid HTTP proxy value.
NSERR_INVAL_FTPPROXY	801	0x321	Invalid FTP proxy value.
NSERR_INVAL_SOCKPROXY	802	0x322	Invalid SOCKS proxy value.
NSERR_INVAL_GOPHERPROXY	803	0x323	Invalid GOPHER proxy value.
NSERR_INVAL_SSLPROXY	804	0x324	Invalid SSL proxy value.
NSERR_INVAL_AAAGRP_MAX	805	0x325	Max 5 groups can be specified in authorizationgroup.
NSERR_INVAL_MAX_PORT_NUM	806	0x326	Maximum 16 ports can be specified in httpport.
NSERR_INVAL_HTTPPORT	807	0x327	Invalid port.
NSERR_INVAL_VPNVSERER_POLTYPE	808	0x328	This type of policy cannot be bound to VPN Vserver.
NSERR_INVAL_VPNGLOBAL_POLTYPE	809	0x329	This type of policy cannot be bound to VPN Global.
NSERR_CPE_REM_INUSE	810	0x32a	Bound policy cannot be removed.
NSERR_PROXY_CONFLICT	811	0x32b	Proxy server for all protocols already configured.
NSERR_PROXY_INVAL	812	0x32c	Domain names allowed only if proxy type is browser
NSERR_PXYEXCPT_INVAL	813	0x32d	Proxy exception allowed only if proxy type is browser
NSERR_CPE_POLTYPE_NO_CSE	814	0x32e	Policy type does not support client security expressions in rule
NSERR_SESSACT_CSE_INCOMPATIBLE	815	0x32f	Session action and rule are incompatible
NSERR_NOMEM_CSE	816	0x330	Not enough memory while adding client security expressions
NSERR_INCOMPAT_FS_RULE	817	0x331	File system expressions supported in authorization policy only
NSERR_INCOMPAT_FS_MIX	818	0x332	Incompatible expressions mixed with file system expressions in rule
NSERR_DR_ENABLE	819	0x333	Dynamic routing can be enabled on only one IP per subnet
NSERR_MAX_DISTANCE	820	0x334	Only null interface routes can have distance equal to 255
NSERR_NULL_ROUTE_DISTANCE	821	0x335	It is not possible to set the administrative distance/cost metric for a null interface route
NSERR_BAD_ACTION_TCP_PROFILE_TYPE	822	0x336	TCP profile cannot be set to this service type
NSERR_BAD_ACTION_HTTP_PROFILE_TYPE	823	0x337	HTTP profile cannot be set to this service type
NSERR_SP_INVALID_THRESHOLD	824	0x338	Invalid base threshold value
NSERR_VIP_ROUTE_EXISTS	825	0x339	VIP exists for this host route
NSERR_ACTION_BOUND	832	0x340	Action bound to policy can not be deleted.
NSERR_MAX_IPLIMIT	833	0x341	Maximum limit for bound IP to this resource record reached, remaining IPs destined for this resource record will be discarded.
NSERR_BAD_PREFIX_LEN	826	0x33a	Invalid rnat/lsn network prefix len it must be 0-128
NSERR_INV_NETADDR	827	0x33b	Invalid IPv6 network address
NSERR_MIN_DISTANCE	828	0x33c	Static route cannot have distance less than 1
NSERR_IPSEC_PROFILE_INUSE	829	0x33d	Profile is in use by an ip tunnel.
NSERR_IPSEC_INVALID_PROFILE_NAME	830	0x33e	Invalid profile name.
NSERR_SPOTTED	831	0x33f	Spotted IP cannot be used here
NSERR_IPSEC_PBR_ONLY_IP_SUPPORTED	834	0x342	Only IP range is supported
NSERR_IPSEC_IP_NOT_CONTIGUOUS	835	0x343	Invalid IP range. The IP range does not cover all the IPs for a given subnet mask
NSERR_INVAL_USER_ACCOUNTING	836	0x344	Invalid userAccounting value. userAccounting value must be a radiusPolicy.
NSERR_RDP_PROFILE_INUSE	837	0x345	Profile is in use.
NSERR_RDP_INVALID_PROFILE_NAME	838	0x346	Invalid profile name.
NSERR_RDP_INVALID_RDP_FILE_NAME	839	0x347	RDP file name should have .rdp extension and some special characters for RDP file name are not supported.
NSERR_RDP_INVALID_SERVERPROFILE_NAME	840	0x348	Invalid server profile name.
NSERR_RDP_SERVERPROFILE_ALREADY_IN_USE	841	0x349	Server profile is already in use.
NSERR_AUTO_PROXY_URL_INVALID	842	0x34a	Invalid Autoproxy URL
NSERR_AUTO_PROXY_NO_BROWSER	843	0x34b	Autoproxy URL is allowed only if proxy type is Browser.
NSERR_AUTO_PROXY_CONFLICT	844	0x34c	Both Autoproxy URL and manual proxy parameters (allprotocolproxy, http proxy, ftp proxy, proxy exception list, …) cannot be configured at same time.
NSERR_RDP_INVALID_HOST_LEN	848	0x350	Invalid Host length. Atleast 3 characters expected
NSERR_RDP_NEED_IP	849	0x351	RDP IP is needed
NSERR_IPSEC_INV_PROF	850	0x352	For IPSEC tunnels, profile name cannot be none
NSERR_RDP_NEED_PSK	854	0x356	PSK is needed
NSERR_IPSEC_ONLY_V1	858	0x35a	Responder Only config is supported with IKEv1
NSERR_RDP_LISTENER_SPECIFY_PORT	859	0x35b	Invalid Listener. Specify Port
NSERR_RDP_INVALID_LISTENER_HOST	860	0x35c	Invalid Listener. Specify valid host, atleast 3 characters expected
NSERR_RDP_LISTENER_INVALID_PORT	861	0x35d	Invalid Listener. Specify valid Port
NSERR_PROXY_NOT_ALLOWED	862	0x35e	Proxy feature not licensed
NSERR_HOST_RT_GW_NOT_SET	3806	0xede	Host Route Gateway not set

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

0x300 ERRORS

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

0x300 ERRORS

0x300 ERRORS

In this article