Citrix ADC 12.1 NITRO API Reference

vxlan

Configuration for “VXLAN” resource.

Properties

(click to see Operations)

Name Data Type Permissions Description
id Read-write A positive integer, which is also called VXLAN Network Identifier (VNI), that uniquely identifies a VXLAN.
Minimum value = 1
Maximum value = 16777215
vlan Read-write ID of VLANs whose traffic is allowed over this VXLAN. If you do not specify any VLAN IDs, the Citrix ADC allows traffic of all VLANs that are not part of any other VXLANs.
Minimum value = 2
Maximum value = 4094
port Read-write Specifies UDP destination port for VXLAN packets.
Default value: 4789
Minimum value = 1
Maximum value = 65534
dynamicrouting Read-write Enable dynamic routing on this VXLAN.
Default value: DISABLED
Possible values = ENABLED, DISABLED
ipv6dynamicrouting Read-write Enable all IPv6 dynamic routing protocols on this VXLAN. Note: For the ENABLED setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line.
Default value: DISABLED
Possible values = ENABLED, DISABLED
type Read-write VXLAN encapsulation type. VXLAN, VXLANGPE.
Default value: VXLAN
Possible values = VXLAN, VXLANGPE
protocol Read-write VXLAN-GPE next protocol. RESERVED, IPv4, IPv6, ETHERNET, NSH.
Default value: ETHERNET
Possible values = IPv4, IPv6, ETHERNET, NSH
innervlantagging Read-write Specifies whether Citrix ADC should generate VXLAN packets with inner VLAN tag.
Default value: DISABLED
Possible values = ENABLED, DISABLED
td Read-only Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
partitionname Read-only The Partition to which this vxlan is bound.
Minimum length = 1
__count Read-only count parameter

Operations

(click to see Properties)

ADD DELETE UPDATE UNSET GET (ALL) GET COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"type":<String_value>,
"protocol":<String_value>,
"innervlantagging":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan/id_value<Double>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":true,
"port":true,
"dynamicrouting":true,
"ipv6dynamicrouting":true,
"innervlantagging":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vxlan resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?pagesize=#no;pageno=#no

Use this query-parameter to get the vxlan resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "vxlan": [ {
"id":<Double_value>,
"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>,
"td":<Double_value>,
"type":<String_value>,
"protocol":<String_value>,
"partitionname":<String_value>
}]}

<!--NeedCopy-->

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan/id_value<Double>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan/id_value<Double>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan/id_value<Double>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "vxlan": [ {
"id":<Double_value>,
"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>,
"td":<Double_value>,
"type":<String_value>,
"protocol":<String_value>,
"partitionname":<String_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vxlan?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "vxlan": [ { "__count": "#no"} ] }

<!--NeedCopy-->
vxlan