Citrix ADC 12.1 NITRO API Reference

nspbr6

Configuration for PBR6 entry resource.

Properties

(click to see Operations)

Name Data Type Permissions Description
name Read-write Name for the PBR6. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the PBR6 is created.
Minimum length = 1
td Read-write Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0
Maximum value = 4094
action Read-write Action to perform on the outgoing IPv6 packets that match the PBR6.

Available settings function as follows:
* ALLOW - The Citrix ADC sends the packet to the designated next-hop router.
* DENY - The Citrix ADC applies the routing table for normal destination-based routing.
Possible values = ALLOW, DENY
srcipv6 Read-write IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.
srcipop Read-write Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ
srcipv6val Read-write IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.
srcport Read-write Port number or range of port numbers to match against the source port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90.
srcportop Read-write Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ
srcportval Read-write Source port (range).
Maximum length = 65535
destipv6 Read-write IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.
destipop Read-write Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ
destipv6val Read-write IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.
destport Read-write Port number or range of port numbers to match against the destination port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90.

Note: The destination port can be specified only for TCP and UDP protocols.
destportop Read-write Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ
destportval Read-write Destination port (range).
Maximum length = 65535
srcmac Read-write MAC address to match against the source MAC address of an outgoing IPv6 packet.
srcmacmask Read-write Used to define range of Source MAC address. It takes string of 0 and 1, 0s are for exact match and 1s for wildcard. For matching first 3 bytes of MAC address, srcMacMask value “000000111111”. .
Default value: “000000000000”
protocol Read-write Protocol, identified by protocol name, to match against the protocol of an outgoing IPv6 packet.
Possible values = ICMPV6, TCP, UDP, ICMP, IGMP, EGP, IGP, ARGUS, RDP, RSVP, EIGRP, L2TP, ISIS, GGP, IPoverIP, ST, CBT, BBN-RCC-M, NVP-II, PUP, EMCON, XNET, CHAOS, MUX, DCN-MEAS, HMP, PRM, XNS-IDP, TRUNK-1, TRUNK-2, LEAF-1, LEAF-2, IRTP, ISO-TP4, NETBLT, MFE-NSP, MERIT-INP, SEP, 3PC, IDPR, XTP, DDP, IDPR-CMTP, TP++, IL, IPv6, SDRP, IPv6-Route, IPv6-Frag, IDRP, GRE, MHRP, BNA, ESP, AH, I-NLSP, SWIPE, NARP, MOBILE, TLSP, SKIP, IPv6-NoNx, IPv6-Opts, Any-Host-Internal-Protocol, CFTP, Any-Local-Network, SAT-EXPAK, KRYPTOLAN, RVD, IPPC, Any-Distributed-File-System, TFTP, VISA, IPCV, CPNX, CPHB, WSN, PVP, BR-SAT-MO, SUN-ND, WB-MON, WB-EXPAK, ISO-IP, VMTP, SECURE-VM, VINES, TTP, NSFNET-IG, DGP, TCF, OSPFIGP, Sprite-RP, LARP, MTP, AX.25, IPIP, MICP, SCC-SP, ETHERIP, Any-Private-Encryption-Scheme, GMTP, IFMP, PNNI, PIM, ARIS, SCPS, QNX, A/N, IPComp, SNP, Compaq-Pe, IPX-in-IP, VRRP, PGM, Any-0-Hop-Protocol, ENCAP, DDX, IATP, STP, SRP, UTI, SMP, SM, PTP, FIRE, CRTP, CRUDP, SSCOPMCE, IPLT, SPS, PIPE, SCTP, FC, RSVP-E2E-IGNORE, Mobility-Header, UDPLite
protocolnumber Read-write Protocol, identified by protocol number, to match against the protocol of an outgoing IPv6 packet.
Minimum value = 1
Maximum value = 255
vlan Read-write ID of the VLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VLANs.
Minimum value = 1
Maximum value = 4094
vxlan Read-write ID of the VXLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VXLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VXLANs.
Minimum value = 1
Maximum value = 16777215
Interface Read-write ID of an interface. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified interface. If you do not specify a value, the appliance compares the PBR6 to the outgoing packets on all interfaces.
priority Read-write Priority of the PBR6, which determines the order in which it is evaluated relative to the other PBR6s. If you do not specify priorities while creating PBR6s, the PBR6s are evaluated in the order in which they are created.
Minimum value = 1
Maximum value = 81920
state Read-write Enable or disable the PBR6. After you apply the PBR6s, the Citrix ADC compares outgoing packets to the enabled PBR6s.
Default value: ENABLED
Possible values = ENABLED, DISABLED
msr Read-write Monitor the route specified by the Next Hop parameter.
Default value: DISABLED
Possible values = ENABLED, DISABLED
monitor Read-write The name of the monitor.(Can be only of type ping or ARP ).
Minimum length = 1
nexthop Read-write IP address of the next hop router to which to send matching packets if action is set to ALLOW. This next hop should be directly reachable from the appliance.
nexthopval Read-write The Next Hop IPv6 address.
iptunnel Read-write The iptunnel name where packets need to be forwarded upon.
vxlanvlanmap Read-write The vlan to vxlan mapping to be applied for incoming packets over this pbr tunnel.
nexthopvlan Read-write VLAN number to be used for link local nexthop .
Minimum value = 1
Maximum value = 4094
ownergroup Read-write The owner node group in a Cluster for this pbr rule. If owner node group is not specified then the pbr rule is treated as Striped pbr rule.
Default value: DEFAULT_NG
Minimum length = 1
detail Read-write To get a detailed view.
kernelstate Read-only Commit status of the PBR6.
Default value: NOTAPPLIED
Possible values = APPLIED, NOTAPPLIED, RE-APPLY, SFAPPLIED, SFNOTAPPLIED
hits Read-only Number of hits of this PBR6.
curstate Read-only If this route is UP/DOWN.
totalprobes Read-only The total number of probes sent.
totalfailedprobes Read-only The total number of failed probes.
failedprobes Read-only Number of the current failed monitoring probes.
monstatcode Read-only The code indicating the monitor response.
monstatparam1 Read-only First parameter for use with message code.
monstatparam2 Read-only Second parameter for use with message code.
monstatparam3 Read-only Third parameter for use with message code.
data Read-only Internal data of this route.
__count Read-only count parameter

Operations

(click to see Properties)

ADD RENUMBER DELETE UPDATE UNSET ENABLE DISABLE CLEAR APPLY GET (ALL) GET COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
<b>"name":<String_value>,
</b>"td":<Double_value>,
<b>"action":<String_value>,
</b>"srcipv6":<Boolean_value>,
"srcipop":<String_value>,
"srcipv6val":<String_value>,
"srcport":<Boolean_value>,
"srcportop":<String_value>,
"srcportval":<String_value>,
"destipv6":<Boolean_value>,
"destipop":<String_value>,
"destipv6val":<String_value>,
"destport":<Boolean_value>,
"destportop":<String_value>,
"destportval":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"Interface":<String_value>,
"priority":<Double_value>,
"state":<String_value>,
"msr":<String_value>,
"monitor":<String_value>,
"nexthop":<Boolean_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"ownergroup":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

renumber

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=renumber

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
<b>"name":<String_value>,
</b>"action":<String_value>,
"srcipv6":<Boolean_value>,
"srcipop":<String_value>,
"srcipv6val":<String_value>,
"srcport":<Boolean_value>,
"srcportop":<String_value>,
"srcportval":<String_value>,
"destipv6":<Boolean_value>,
"destipop":<String_value>,
"destipv6val":<String_value>,
"destport":<Boolean_value>,
"destportop":<String_value>,
"destportval":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"Interface":<String_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"nexthop":<Boolean_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
<b>"name":<String_value>,
</b>"srcipv6":true,
"srcport":true,
"destipv6":true,
"destport":true,
"srcmac":true,
"srcmacmask":true,
"protocol":true,
"Interface":true,
"vlan":true,
"vxlan":true,
"msr":true,
"monitor":true,
"nexthop":true,
"iptunnel":true,
"nexthopvlan":true,
"vxlanvlanmap":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

enable

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=enable

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
<b>"name":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

disable

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=disable

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
<b>"name":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

clear

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=clear

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

apply

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?action=apply

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"nspbr6":{
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?args=name:<String_value>,detail:<Boolean_value>

Use this query-parameter to get nspbr6 resources based on additional properties.

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nspbr6 resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?pagesize=#no;pageno=#no

Use this query-parameter to get the nspbr6 resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "nspbr6": [ {
name:<String_value>,detail:<Boolean_value>"td":<Double_value>,
"action":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"srcportval":<String_value>,
"srcportop":<String_value>,
"destportval":<String_value>,
"destportop":<String_value>,
"srcipv6val":<String_value>,
"srcipop":<String_value>,
"destipv6val":<String_value>,
"destipop":<String_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"state":<String_value>,
"kernelstate":<String_value>,
"Interface":<String_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"curstate":<Double_value>,
"totalprobes":<Double_value>,
"totalfailedprobes":<Double_value>,
"failedprobes":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"data":<Boolean_value>,
"ownergroup":<String_value>
}]}

<!--NeedCopy-->

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "nspbr6": [ {
name:<String_value>,detail:<Boolean_value>"td":<Double_value>,
"action":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"srcportval":<String_value>,
"srcportop":<String_value>,
"destportval":<String_value>,
"destportop":<String_value>,
"srcipv6val":<String_value>,
"srcipop":<String_value>,
"destipv6val":<String_value>,
"destipop":<String_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"state":<String_value>,
"kernelstate":<String_value>,
"Interface":<String_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"curstate":<Double_value>,
"totalprobes":<Double_value>,
"totalfailedprobes":<Double_value>,
"failedprobes":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"data":<Boolean_value>,
"ownergroup":<String_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nspbr6?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "nspbr6": [ { "__count": "#no"} ] }

<!--NeedCopy-->
nspbr6