ADC NITRO APIs

appfwglobal_auditnslogpolicy_binding

Binding object showing the auditnslogpolicy that can be bound to appfwglobal.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority Read-write The priority of the policy.
policyname Read-write Name of the policy.
labelname Read-write Name of the policy label to invoke if the current policy evaluates to TRUE, the invoke parameter is set, and Label Type is set to Policy Label.
state Read-write Enable or disable the binding to activate or deactivate the policy. This is applicable to classic policies only.

Possible values = ENABLED, DISABLED
gotopriorityexpression Read-write Expression or other value specifying the next policy to evaluate if the current policy evaluates to TRUE. Specify one of the following values
  • NEXT - Evaluate the policy with the next higher priority number.
  • END - End policy evaluation.
  • USE_INVOCATION_RESULT - Applicable if this policy invokes another policy label. If the final goto in the invoked policy label has a value of END, the evaluation stops. If the final goto is anything other than END, the current policy label performs a NEXT.
  • An expression that evaluates to a number. If you specify an expression, the number to which it evaluates determines the next policy to evaluate, as follows
  • If the expression evaluates to a higher numbered priority, the policy with that priority is evaluated next.
  • If the expression evaluates to the priority of the current policy, the policy with the next higher numbered priority is evaluated next.
  • If the expression evaluates to a number that is larger than the largest numbered priority, policy evaluation ends.An UNDEF event is triggered if
  • The expression is invalid.
  • The expression evaluates to a priority number that is smaller than the current policy’s priority number.
  • The expression evaluates to a priority number that is between the current policy’s priority number (say, 30) and the highest priority number (say, 100), but does not match any configured priority number (for example, the expression evaluates to the number 85). This example assumes that the priority number increments by 10 for every successive policy, and therefore a priority number of 85 does not exist in the policy label.
  • type Read-write Bind point to which to policy is bound.

    Possible values = REQ_OVERRIDE, REQ_DEFAULT, HTTPQUIC_REQ_OVERRIDE, HTTPQUIC_REQ_DEFAULT, NONE
    invoke Read-write If the current policy evaluates to TRUE, terminate evaluation of policies bound to the current policy label, and then forward the request to the specified virtual server or evaluate the specified policy label.
    labeltype Read-write Type of policy label to invoke if the current policy evaluates to TRUE and the invoke parameter is set. Available settings function as follows
  • reqvserver. Invoke the unnamed policy label associated with the specified request virtual server.
  • policylabel. Invoke the specified user-defined policy label. Possible values = reqvserver, policylabel
  • policytype Read-only .

    Possible values = Classic Policy, Advanced Policy
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • GET
    • COUNT

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: * Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address /nitro/v1/config/appfwglobal_auditnslogpolicy_binding HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {
    "appfwglobal_auditnslogpolicy_binding":{
    <b>"policyname":<String_value>,
    </b><b>"priority":<Double_value>,
    </b>"state":<String_value>,
    "gotopriorityexpression":<String_value>,
    "type":<String_value>,
    "invoke":<Boolean_value>,
    "labeltype":<String_value>,
    "labelname":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding? args= policyname:<String_value>, type: <String_value> ,priority: <Double_value>

    HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding? args=type: <String_value>

    Use this query-parameter to get appfwglobal_auditnslogpolicy_binding resources based on additional properties.

    filter http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding? filter=property-name1:property-value1,property-name2:property-value2

    Use this query-parameter to get the filtered set of appfwglobal_auditnslogpolicy_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    pagination http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding? pagesize=#no;pageno=#no

    Use this query-parameter to get the appfwglobal_auditnslogpolicy_binding resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "appfwglobal_auditnslogpolicy_binding": [ {
    "priority":<Double_value>,
    "policyname":<String_value>,
    "labelname":<String_value>,
    "state":<String_value>,
    "gotopriorityexpression":<String_value>,
    "type":<String_value>,
    "invoke":<Boolean_value>,
    "labeltype":<String_value>,
    "policytype":<String_value>
    }]}
    
    <!--NeedCopy-->
    

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwglobal_auditnslogpolicy_binding? count=yes HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "appfwglobal_auditnslogpolicy_binding": [ { "__count": "#no"} ] }
    
    <!--NeedCopy-->
    
    appfwglobal_auditnslogpolicy_binding