ADC NITRO APIs

gslbdomain_gslbvserver_binding

Binding object showing the gslbvserver that can be bound to gslbdomain.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name of the Domain.

Minimum length = 1
vservername Read-write .
sitename Read-only Name of the site to which the service belongs.
backuplbmethod Read-only Indicates the backup method in case the primary fails.

Possible values = ROUNDROBIN, LEASTCONNECTION, LEASTRESPONSETIME, SOURCEIPHASH, LEASTBANDWIDTH, LEASTPACKETS, STATICPROXIMITY, RTT, CUSTOMLOAD, API
customheaders Read-only The string that is sent to the service. Applicable to HTTP ,HTTP-ECV and RTSP monitor types.
persistenceid Read-only Persistence id of the gslb vserver.
state Read-only The state of the vserver.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
edr Read-only Send clients an empty DNS response when the GSLB virtual server is DOWN.

Default value: DISABLED

Possible values = ENABLED, DISABLED
lbmethod Read-only The load balancing method set for the virtual server.

Possible values = ROUNDROBIN, LEASTCONNECTION, LEASTRESPONSETIME, SOURCEIPHASH, LEASTBANDWIDTH, LEASTPACKETS, STATICPROXIMITY, RTT, CUSTOMLOAD, API
cip Read-only Indicates if Client IP option is enabled.

Possible values = ENABLED, DISABLED
statechangetimesec Read-only Time since last state change.
netmask Read-only Netmask.

Minimum length = 1
dnsrecordtype Read-only The IP type for this GSLB vserver.

Possible values = A, AAAA, CNAME, NAPTR
persistmask Read-only The optional IPv4 network mask applied to IPv4 addresses to establish source IP address based persistence.

Minimum length = 1
sitepersistence Read-only Indicates the type of cookie persistence set.

Possible values = ConnectionProxy, HTTPRedirect, NONE
servicetype Read-only The type GSLB service.

Possible values = HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, NNTP, ANY, SIP_UDP, SIP_TCP, SIP_SSL, RADIUS, RDP, RTSP, MYSQL, MSSQL, ORACLE
v6persistmasklen Read-only Number of bits to consider in an IPv6 source IP address when creating source IP address based persistence sessions.

Default value: 128

Minimum value = 1

Maximum value = 128
v6netmasklen Read-only Number of bits to consider, in an IPv6 source IP address, for creating the hash that is required by the SOURCEIPHASH load balancing method.

Default value: 128

Minimum value = 1

Maximum value = 128
persistencetype Read-only Indicates if persistence is set on the gslb vserver.

Possible values = SOURCEIP, NONE
siteprefix Read-only The site prefix string.
dynamicweight Read-only Dynamic weight method of the vserver.

Default value: DISABLED

Possible values = SERVICECOUNT, SERVICEWEIGHT, DISABLED
mir Read-only .

Default value: DISABLED

Possible values = ENABLED, DISABLED
__count Read-only count parameter

Operations

(click to see Properties )

  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of gslbdomain_gslbvserver_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the gslbdomain_gslbvserver_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbdomain_gslbvserver_binding": [ {
"name":<String_value>,
"vservername":<String_value>,
"sitename":<String_value>,
"backuplbmethod":<String_value>,
"customheaders":<String_value>,
"persistenceid":<Double_value>,
"state":<String_value>,
"edr":<String_value>,
"lbmethod":<String_value>,
"cip":<String_value>,
"statechangetimesec":<String_value>,
"netmask":<String_value>,
"dnsrecordtype":<String_value>,
"persistmask":<String_value>,
"sitepersistence":<String_value>,
"servicetype":<String_value>,
"v6persistmasklen":<Double_value>,
"v6netmasklen":<Double_value>,
"persistencetype":<String_value>,
"siteprefix":<String_value>,
"dynamicweight":<String_value>,
"mir":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbdomain_gslbvserver_binding": [ {
"name":<String_value>,
"vservername":<String_value>,
"sitename":<String_value>,
"backuplbmethod":<String_value>,
"customheaders":<String_value>,
"persistenceid":<Double_value>,
"state":<String_value>,
"edr":<String_value>,
"lbmethod":<String_value>,
"cip":<String_value>,
"statechangetimesec":<String_value>,
"netmask":<String_value>,
"dnsrecordtype":<String_value>,
"persistmask":<String_value>,
"sitepersistence":<String_value>,
"servicetype":<String_value>,
"v6persistmasklen":<Double_value>,
"v6netmasklen":<Double_value>,
"persistencetype":<String_value>,
"siteprefix":<String_value>,
"dynamicweight":<String_value>,
"mir":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_gslbvserver_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"gslbdomain_gslbvserver_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
gslbdomain_gslbvserver_binding