ADC NITRO APIs

contentinspectionpolicy

Configuration for ContentInspection policy resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name for the contentInspection policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Can be changed after the contentInspection policy is added. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my contentInspection policy” or ‘my contentInspection policy’).
rule Read-write Expression that the policy uses to determine whether to execute the specified action.
action Read-write Name of the contentInspection action to perform if the request matches this contentInspection policy. There are also some built-in actions which can be used. These are
  • NOINSPECTION - Send the request from the client to the server or response from the server to the client without sending it to Inspection device for Content Inspection.
  • RESET - Resets the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired.
  • DROP - Drop the request without sending a response to the user.
  • undefaction Read-write Action to perform if the result of policy evaluation is undefined (UNDEF). An UNDEF event indicates an internal error condition. Only the above built-in actions can be used.
    comment Read-write Any type of information about this contentInspection policy.
    logaction Read-write Name of the messagelog action to use for requests that match this policy.
    newname Read-write New name for the contentInspection policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my contentInspection policy” or ‘my contentInspection policy’). Minimum length = 1
    hits Read-only Number of hits.
    undefhits Read-only Number of policy UNDEF hits.
    builtin <String[]> Read-only Flag to determine if contentInspection policy is built-in or not.

    Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
    feature Read-only The feature to be checked while applying this config.
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • UPDATE
    • UNSET
    • GET (ALL)
    • GET
    • COUNT
    • RENAME

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: * Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"contentinspectionpolicy":{
    <b>"name":<String_value>,
    </b><b>"rule":<String_value>,
    </b><b>"action":<String_value>,
    </b>"undefaction":<String_value>,
    "comment":<String_value>,
    "logaction":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    update

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"contentinspectionpolicy":{
    <b>"name":<String_value>,
    </b>"rule":<String_value>,
    "action":<String_value>,
    "undefaction":<String_value>,
    "comment":<String_value>,
    "logaction":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    unset

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? action=unset HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"contentinspectionpolicy":{
    <b>"name":<String_value>,
    </b>"undefaction":true,
    "comment":true,
    "logaction":true
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    rename

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? action=rename HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"contentinspectionpolicy":{
    <b>"name":<String_value>,
    </b><b>"newname":<String_value>
    </b>}}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    filter http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? filter=property-name1:property-val1,property-name2:property-val2

    Use this query-parameter to get the filtered set of contentinspectionpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    view http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? view=summary

    Use this query-parameter to get the summary output of contentinspectionpolicy resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    pagination http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? pagesize=#no;pageno=#no

    Use this query-parameter to get the contentinspectionpolicy resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "contentinspectionpolicy": [ {
    "name":<String_value>,
    "rule":<String_value>,
    "action":<String_value>,
    "undefaction":<String_value>,
    "hits":<Double_value>,
    "undefhits":<Double_value>,
    "comment":<String_value>,
    "logaction":<String_value>,
    "builtin":<String[]_value>,
    "feature":<String_value>
    }]}
    
    <!--NeedCopy-->
    

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> ? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    view http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> ? view=summary

    Use this query-parameter to get the summary output of contentinspectionpolicy resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "contentinspectionpolicy": [ {
    "name":<String_value>,
    "rule":<String_value>,
    "action":<String_value>,
    "undefaction":<String_value>,
    "hits":<Double_value>,
    "undefhits":<Double_value>,
    "comment":<String_value>,
    "logaction":<String_value>,
    "builtin":<String[]_value>,
    "feature":<String_value>
    }]}
    
    <!--NeedCopy-->
    

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? count=yes HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "contentinspectionpolicy": [ { "__count": "#no"} ] }
    
    <!--NeedCopy-->
    
    contentinspectionpolicy