ADC NITRO APIs

lbgroup

Configuration for LB group resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name of the load balancing virtual server group.

Minimum length = 1
persistencetype Read-write Type of persistence for the group. Available settings function as follows
  • SOURCEIP - Create persistence sessions based on the client IP.
  • COOKIEINSERT - Create persistence sessions based on a cookie in client requests. The cookie is inserted by a Set-Cookie directive from the server, in its first response to a client.
  • RULE - Create persistence sessions based on a user defined rule.
  • NONE - Disable persistence for the group. Possible values = SOURCEIP, COOKIEINSERT, RULE, NONE
  • persistencebackup Read-write Type of backup persistence for the group.

    Possible values = SOURCEIP, NONE
    backuppersistencetimeout Read-write Time period, in minutes, for which backup persistence is in effect.

    Default value: 2

    Minimum value = 2

    Maximum value = 1440
    persistmask Read-write Persistence mask to apply to source IPv4 addresses when creating source IP based persistence sessions.

    Minimum length = 1
    cookiename Read-write Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.
    v6persistmasklen Read-write Persistence mask to apply to source IPv6 addresses when creating source IP based persistence sessions.

    Default value: 128

    Minimum value = 1

    Maximum value = 128
    cookiedomain Read-write Domain attribute for the HTTP cookie.

    Minimum length = 1
    timeout Read-write Time period for which a persistence session is in effect.

    Default value: 2

    Minimum value = 0

    Maximum value = 1440
    rule Read-write Expression, or name of a named expression, against which traffic is evaluated. The following requirements apply only to the Citrix ADC CLI
  • If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
  • If the expression itself includes double quotation marks, escape the quotations by using the \ character.
  • Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks. Default value: “None”
  • mastervserver Read-write When USE_VSERVER_PERSISTENCE is enabled, one can use this setting to designate a member vserver as master which is responsible to create the persistence sessions.
    usevserverpersistency Read-write Use this parameter to enable vserver level persistence on group members. This allows member vservers to have their own persistence, but need to be compatible with other members persistence rules. When this setting is enabled persistence sessions created by any of the members can be shared by other member vservers.

    Default value: DISABLED

    Possible values = ENABLED, DISABLED
    newname Read-write New name for the load balancing virtual server group.

    Minimum length = 1
    td Read-only Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

    Minimum value = 0

    Maximum value = 4094
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • UPDATE
    • UNSET
    • DELETE
    • GET (ALL)
    • GET
    • COUNT
    • RENAME

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: * Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"lbgroup":{
    <b>"name":<String_value>,
    </b>"persistencetype":<String_value>,
    "persistencebackup":<String_value>,
    "backuppersistencetimeout":<Double_value>,
    "persistmask":<String_value>,
    "cookiename":<String_value>,
    "v6persistmasklen":<Double_value>,
    "cookiedomain":<String_value>,
    "timeout":<Double_value>,
    "rule":<String_value>,
    "mastervserver":<String_value>,
    "usevserverpersistency":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    update

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"lbgroup":{
    <b>"name":<String_value>,
    </b>"persistencetype":<String_value>,
    "persistencebackup":<String_value>,
    "backuppersistencetimeout":<Double_value>,
    "persistmask":<String_value>,
    "cookiename":<String_value>,
    "v6persistmasklen":<Double_value>,
    "cookiedomain":<String_value>,
    "timeout":<Double_value>,
    "rule":<String_value>,
    "usevserverpersistency":<String_value>,
    "mastervserver":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    unset

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? action=unset HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"lbgroup":{
    <b>"name":<String_value>,
    </b>"persistencetype":true,
    "persistencebackup":true,
    "backuppersistencetimeout":true,
    "persistmask":true,
    "cookiename":true,
    "v6persistmasklen":true,
    "cookiedomain":true,
    "timeout":true,
    "rule":true,
    "usevserverpersistency":true,
    "mastervserver":true
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    rename

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? action=rename HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"lbgroup":{
    <b>"name":<String_value>,
    </b><b>"newname":<String_value>
    </b>}}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    filter http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? filter=property-name1:property-val1,property-name2:property-val2

    Use this query-parameter to get the filtered set of lbgroup resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    view http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? view=summary

    Use this query-parameter to get the summary output of lbgroup resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    pagination http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? pagesize=#no;pageno=#no

    Use this query-parameter to get the lbgroup resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "lbgroup": [ {
    "name":<String_value>,
    "persistencetype":<String_value>,
    "persistencebackup":<String_value>,
    "backuppersistencetimeout":<Double_value>,
    "persistmask":<String_value>,
    "v6persistmasklen":<Double_value>,
    "cookiename":<String_value>,
    "cookiedomain":<String_value>,
    "timeout":<Double_value>,
    "rule":<String_value>,
    "td":<Double_value>,
    "usevserverpersistency":<String_value>,
    "mastervserver":<String_value>
    }]}
    
    <!--NeedCopy-->
    

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> ? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    view http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> ? view=summary

    Use this query-parameter to get the summary output of lbgroup resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "lbgroup": [ {
    "name":<String_value>,
    "persistencetype":<String_value>,
    "persistencebackup":<String_value>,
    "backuppersistencetimeout":<Double_value>,
    "persistmask":<String_value>,
    "v6persistmasklen":<Double_value>,
    "cookiename":<String_value>,
    "cookiedomain":<String_value>,
    "timeout":<Double_value>,
    "rule":<String_value>,
    "td":<Double_value>,
    "usevserverpersistency":<String_value>,
    "mastervserver":<String_value>
    }]}
    
    <!--NeedCopy-->
    

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? count=yes HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "lbgroup": [ { "__count": "#no"} ] }
    
    <!--NeedCopy-->
    
    lbgroup