ADC NITRO APIs

channel_interface_binding

Binding object showing the interface that can be bound to channel.

Properties

(click to see Operations )

Name Data Type Permissions Description
id Read-write ID of the LA channel or the cluster LA channel to which you want to bind interfaces. Specify an LA channel in LA/x notation, where x can range from 1 to 8 or a cluster LA channel in CLA/x notation or Link redundant channel in LR/x notation , where x can range from 1 to 4.
svmcmd Read-write New attribute added to identify the source of cmd, when SVM fires the nitro cmd, it will set the value of SVMCMD to be 1. .

Default value: 0
ifnum <String[]> Read-write Interfaces to be bound to the LA channel of a Citrix ADC or to the LA channel of a cluster configuration. For an LA channel of a Citrix ADC, specify an interface in C/U notation (for example, 1/3). For an LA channel of a cluster configuration, specify an interface in N/C/U notation (for example, 2/1/3). where C can take one of the following values
  • 0 - Indicates a management interface.
  • 1 - Indicates a 1 Gbps port.
  • 10 - Indicates a 10 Gbps port. U is a unique integer for representing an interface in a particular port group. N is the ID of the node to which an interface belongs in a cluster configuration. Use spaces to separate multiple entries.
  • lamode Read-only The mode(AUTO/MANNUAL) for the LA channel.

    Possible values = MANUAL, AUTO
    slavespeed Read-only Speed of the member interfaces.
    slavemedia Read-only Media type of the member interfaces.
    slaveduplex Read-only Duplex of the member interfaces.
    lractiveintf Read-only LR set member interface state(active/inactive).
    slaveflowctl Read-only Flowcontrol of the member interfaces.
    slavestate Read-only State of the member interfaces.
    slavetime Read-only UP time of the member interfaces.
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • GET
    • GET (ALL)
    • COUNT

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: * Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address /nitro/v1/config/channel_interface_binding HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {
    "channel_interface_binding":{
    <b>"id":<String_value>,
    </b><b>"ifnum":<String[]_value></b>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> ? args= ifnum:<String[]_value>

    HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

    Use this query-parameter to get the filtered set of channel_interface_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    pagination http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> ? pagesize=#no;pageno=#no

    Use this query-parameter to get the channel_interface_binding resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "channel_interface_binding": [ {
    "id":<String_value>,
    "svmcmd":<Double_value>,
    "ifnum":<String[]_value>,
    "lamode":<String_value>,
    "slavespeed":<Double_value>,
    "slavemedia":<Double_value>,
    "slaveduplex":<Double_value>,
    "lractiveintf":<Double_value>,
    "slaveflowctl":<Double_value>,
    "slavestate":<Double_value>,
    "slavetime":<Double_value>
    }]}
    
    <!--NeedCopy-->
    

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding? bulkbindings=yes

    NITRO allows you to fetch bindings in bulk.

    Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "channel_interface_binding": [ {
    "id":<String_value>,
    "svmcmd":<Double_value>,
    "ifnum":<String[]_value>,
    "lamode":<String_value>,
    "slavespeed":<Double_value>,
    "slavemedia":<Double_value>,
    "slaveduplex":<Double_value>,
    "lractiveintf":<Double_value>,
    "slaveflowctl":<Double_value>,
    "slavestate":<Double_value>,
    "slavetime":<Double_value>
    }]}
    
    <!--NeedCopy-->
    

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/channel_interface_binding/ id_value<String> ? count=yes HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {"channel_interface_binding": [ { "__count": "#no"} ] }
    
    <!--NeedCopy-->
    
    channel_interface_binding