Developer Documentation
ADC NITRO APIs
Current Release 13.1 13

lsnrtspalgsession_datachannel_binding

May 23, 2024
Contributed by: 
C

Binding object showing the datachannel that can be bound to lsnrtspalgsession.

Properties

(click to see Operations )

Name Data Type Permissions Description
channelip Read-write IP address of the channel.
sessionid Read-write Session ID for the RTSP call.
channelnatip Read-only Natted IP address of the channel.
channelport Read-only port for the channel.
channelflags Read-only Flags for the call entry.
channeltimeout Read-only Timeout for the channel.
channelnatport Read-only Natted port for the channel.
channelprotocol Read-only Channel transport protocol.

Possible values = HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, NNTP, RPCSVR, DNS, ADNS, SNMP, RTSP, DHCPRA, ANY, SIP_UDP, SIP_TCP, SIP_SSL, DNS_TCP, ADNS_TCP, HTTPSVR, HTTPCLIENT, NAT, HA, AAA, SINCTCP, VPN AFTP, MONITORS, SSLVPN UDP, SINCUDP, RIP, UDP CLNT, SASP, RPCCLNTS, ROUTE, AUDIT, STA HTTP, STA SSL, DNS RESOLVE, RDP, MYSQL, MSSQL, DIAMETER, SSL_DIAMETER, TFTP, ORACLE, ICA, RADIUS, RADIUSListener, SMPP, PPTP, GRE, SYSLOGTCP, SYSLOGUDP, FIX, SSL_FIX, QUIC, TFTP_DATA, USER_TCP, USER_SSL_TCP, MONGO, MONGO_TLS, MQTT, MQTT_TLS, QUIC_BRIDGE, HTTP_QUIC, CT_TCP, CT_UDP, DOT, ADNS_DOT
__count Read-only count parameter

Operations

(click to see Properties )

  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding/ sessionid_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding/ sessionid_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of lsnrtspalgsession_datachannel_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding/ sessionid_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the lsnrtspalgsession_datachannel_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{  "lsnrtspalgsession_datachannel_binding": [ {
"channelip":<String_value>,
"sessionid":<String_value>,
"channelnatip":<String_value>,
"channelport":<Integer_value>,
"channelflags":<Double_value>,
"channeltimeout":<Double_value>,
"channelnatport":<Integer_value>,
"channelprotocol":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{  "lsnrtspalgsession_datachannel_binding": [ {
"channelip":<String_value>,
"sessionid":<String_value>,
"channelnatip":<String_value>,
"channelport":<Integer_value>,
"channelflags":<Double_value>,
"channeltimeout":<Double_value>,
"channelnatport":<Integer_value>,
"channelprotocol":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnrtspalgsession_datachannel_binding/ sessionid_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{"lsnrtspalgsession_datachannel_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
lsnrtspalgsession_datachannel_binding
May 23, 2024
Contributed by: 
C
May 23, 2024
Contributed by: 
C

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.