ADC NITRO APIs

authenticationpolicy

Configuration for Authentication Policy resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name for the advance AUTHENTICATION policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after AUTHENTICATION policy is created. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication policy” or ‘my authentication policy’). Minimum length = 1
rule Read-write Name of the Citrix ADC named rule, or an expression, that the policy uses to determine whether to attempt to authenticate the user with the AUTHENTICATION server.
action Read-write Name of the authentication action to be performed if the policy matches.
undefaction Read-write Action to perform if the result of policy evaluation is undefined (UNDEF). An UNDEF event indicates an internal error condition. Only the above built-in actions can be used.
comment Read-write Any comments to preserve information about this policy.
logaction Read-write Name of messagelog action to use when a request matches this policy.
newname Read-write New name for the authentication policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication policy” or ‘my authentication policy’). Minimum length = 1
hits Read-only Number of hits.
description Read-only Description of the policy.
policysubtype Read-only .

Possible values = LOCAL, RADIUS, LDAP, TACACS, CERT, NEGOTIATE, SAML, PROFILE, DFA, SAMLIDP, WEBAUTH, OAUTH, NO_AUTHN, EPA, SFAUTH, AZUREVAULT, EMAIL, CAPTCHA
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT
  • RENAME

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? action=rename HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicy":{
<b>"name":<String_value>,
</b><b>"newname":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicy":{
<b>"name":<String_value>,
</b>"undefaction":true,
"comment":true,
"logaction":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicy":{
<b>"name":<String_value>,
</b>"rule":<String_value>,
"action":<String_value>,
"undefaction":<String_value>,
"comment":<String_value>,
"logaction":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicy":{
<b>"name":<String_value>,
</b><b>"rule":<String_value>,
</b><b>"action":<String_value>,
</b>"undefaction":<String_value>,
"comment":<String_value>,
"logaction":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? view=summary

Use this query-parameter to get the summary output of authenticationpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationpolicy resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationpolicy": [ {
"name":<String_value>,
"rule":<String_value>,
"action":<String_value>,
"undefaction":<String_value>,
"comment":<String_value>,
"logaction":<String_value>,
"hits":<Double_value>,
"description":<String_value>,
"policysubtype":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of authenticationpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationpolicy": [ {
"name":<String_value>,
"rule":<String_value>,
"action":<String_value>,
"undefaction":<String_value>,
"comment":<String_value>,
"logaction":<String_value>,
"hits":<Double_value>,
"description":<String_value>,
"policysubtype":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicy? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationpolicy": [ { "__count": "#no"} ] }

<!--NeedCopy-->
authenticationpolicy