ADC NITRO APIs

authenticationsamlaction

Configuration for AAA Saml action resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name for the SAML server profile (action). Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after SAML profile is created. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication action” or ‘my authentication action’). Minimum length = 1
metadataurl Read-write This URL is used for obtaining saml metadata. Note that it fills samlIdPCertName and samlredirectUrl fields so those fields should not be updated when metadataUrl present.
samlidpcertname Read-write Name of the SSL certificate used to verify responses from SAML Identity Provider (IdP). Note that if metadateURL is present then this filed should be empty.

Minimum length = 1
samlsigningcertname Read-write Name of the SSL certificate to sign requests from ServiceProvider (SP) to Identity Provider (IdP).

Minimum length = 1
samlredirecturl Read-write URL to which users are redirected for authentication. Note that if metadateURL is present then this filed should be empty.

Minimum length = 1
samlacsindex Read-write Index/ID of the metadata entry corresponding to this configuration.

Default value: 255

Minimum value = 0

Maximum value = 255
samluserfield Read-write SAML user ID, as given in the SAML assertion.

Minimum length = 1
samlrejectunsignedassertion Read-write Reject unsigned SAML assertions. ON option results in rejection of Assertion that is received without signature. STRICT option ensures that both Response and Assertion are signed.

Default value: ON

Possible values = ON, STRICT
samlissuername Read-write The name to be used in requests sent from Citrix ADC to IdP to uniquely identify Citrix ADC.

Minimum length = 1
samltwofactor Read-write Option to enable second factor after SAML.

Default value: OFF

Possible values = ON, OFF
defaultauthenticationgroup Read-write This is the default group that is chosen when the authentication succeeds in addition to extracted groups.
attribute1 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute1. Maximum length of the extracted attribute is 239 bytes.
attribute2 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute2. Maximum length of the extracted attribute is 239 bytes.
attribute3 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute3. Maximum length of the extracted attribute is 239 bytes.
attribute4 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute4. Maximum length of the extracted attribute is 239 bytes.
attribute5 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute5. Maximum length of the extracted attribute is 239 bytes.
attribute6 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute6. Maximum length of the extracted attribute is 239 bytes.
attribute7 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute7. Maximum length of the extracted attribute is 239 bytes.
attribute8 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute8. Maximum length of the extracted attribute is 239 bytes.
attribute9 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute9. Maximum length of the extracted attribute is 239 bytes.
attribute10 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute10. Maximum length of the extracted attribute is 239 bytes.
attribute11 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute11. Maximum length of the extracted attribute is 239 bytes.
attribute12 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute12. Maximum length of the extracted attribute is 239 bytes.
attribute13 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute13. Maximum length of the extracted attribute is 239 bytes.
attribute14 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute14. Maximum length of the extracted attribute is 239 bytes.
attribute15 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute15. Maximum length of the extracted attribute is 239 bytes.
attribute16 Read-write Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute16. Maximum length of the extracted attribute is 239 bytes.
attributes Read-write List of attribute names separated by ‘,’ which needs to be extracted.

Note that preceeding and trailing spaces will be removed.

Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes.

These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session.
relaystaterule Read-write Boolean expression that will be evaluated to validate the SAML Response. Examples set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.EQ("https://fqdn.com.html")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS("https://fqdn.com.html")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS_ANY("patset_name")' set authentication samlAction samlsp -relaystateRule 'AAA.LOGIN.RELAYSTATE.REGEX_MATCH(re#http://.com/#)'. Maximum length = 8192
signaturealg Read-write Algorithm to be used to sign/verify SAML transactions.

Default value: RSA-SHA256

Possible values = RSA-SHA1, RSA-SHA256
digestmethod Read-write Algorithm to be used to compute/verify digest for SAML transactions.

Default value: SHA256

Possible values = SHA1, SHA256
requestedauthncontext Read-write This element specifies the authentication context requirements of authentication statements returned in the response.

Default value: exact

Possible values = exact, minimum, maximum, better
authnctxclassref <String[]> Read-write This element specifies the authentication class types that are requested from IdP (IdentityProvider).

InternetProtocol: This is applicable when a principal is authenticated through the use of a provided IP address.

InternetProtocolPassword: This is applicable when a principal is authenticated through the use of a provided IP address, in addition to a username/password.

Kerberos: This is applicable when the principal has authenticated using a password to a local authentication authority, in order to acquire a Kerberos ticket.

MobileOneFactorUnregistered: This indicates authentication of the mobile device without requiring explicit end-user interaction.

MobileTwoFactorUnregistered: This indicates two-factor based authentication during mobile customer registration process, such as secure device and user PIN.

MobileOneFactorContract: Reflects mobile contract customer registration procedures and a single factor authentication.

MobileTwoFactorContract: Reflects mobile contract customer registration procedures and a two-factor based authentication.

Password: This class is applicable when a principal authenticates using password over unprotected http session.

PasswordProtectedTransport: This class is applicable when a principal authenticates to an authentication authority through the presentation of a password over a protected session.

PreviousSession: This class is applicable when a principal had authenticated to an authentication authority at some point in the past using any authentication context.

X509: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of an X.509 Public Key Infrastructure.

PGP: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of a PGP Public Key Infrastructure.

SPKI: This indicates that the principal authenticated by means of a digital signature where the key was validated via an SPKI Infrastructure.

XMLDSig: This indicates that the principal authenticated by means of a digital signature according to the processing rules specified in the XML Digital Signature specification.

Smartcard: This indicates that the principal has authenticated using smartcard.

SmartcardPKI: This class is applicable when a principal authenticates to an authentication authority through a two-factor authentication mechanism using a smartcard with enclosed private key and a PIN.

SoftwarePKI: This class is applicable when a principal uses an X.509 certificate stored in software to authenticate to the authentication authority.

Telephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone number, transported via a telephony protocol such as ADSL.

NomadTelephony: Indicates that the principal is “roaming” and authenticates via the means of the line number, a user suffix, and a password element.

PersonalTelephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone.

AuthenticatedTelephony: Indicates that the principal authenticated via the means of the line number, a user suffix, and a password element.

SecureRemotePassword: This class is applicable when the authentication was performed by means of Secure Remote Password.

TLSClient: This class indicates that the principal authenticated by means of a client certificate, secured with the SSL/TLS transport.

TimeSyncToken: This is applicable when a principal authenticates through a time synchronization token.

Unspecified: This indicates that the authentication was performed by unspecified means.

Windows: This indicates that Windows integrated authentication is utilized for authentication.

Possible values = InternetProtocol, InternetProtocolPassword, Kerberos, MobileOneFactorUnregistered, MobileTwoFactorUnregistered, MobileOneFactorContract, MobileTwoFactorContract, Password, PasswordProtectedTransport, PreviousSession, X509, PGP, SPKI, XMLDSig, Smartcard, SmartcardPKI, SoftwarePKI, Telephony, NomadTelephony, PersonalTelephony, AuthenticatedTelephony, SecureRemotePassword, TLSClient, TimeSyncToken, Unspecified, Windows
customauthnctxclassref Read-write This element specifies the custom authentication class reference to be sent as a part of the Authentication Request that is sent by the SP to SAML IDP. The input string must be the body of the authentication class being requested.

Input format: Alphanumeric string or URL specifying the body of the Request.If more than one string has to be provided, then the same can be done by specifying the classes as a string of comma separated values.

Example input: set authentication samlaction samlact1 -customAuthnCtxClassRef http://www.class1.com/LoA1,http://www.class2.com/LoA2

.

Maximum length = 512
samlbinding Read-write This element specifies the transport mechanism of saml messages.

Default value: POST

Possible values = REDIRECT, POST, ARTIFACT
attributeconsumingserviceindex Read-write Index/ID of the attribute specification at Identity Provider (IdP). IdP will locate attributes requested by SP using this index and send those attributes in Assertion.

Default value: 255

Minimum value = 0

Maximum value = 255
sendthumbprint Read-write Option to send thumbprint instead of x509 certificate in SAML request.

Default value: OFF

Possible values = ON, OFF
enforceusername Read-write Option to choose whether the username that is extracted from SAML assertion can be edited in login page while doing second factor.

Default value: ON

Possible values = ON, OFF
logouturl Read-write SingleLogout URL on IdP to which logoutRequest will be sent on Citrix ADC session cleanup.
artifactresolutionserviceurl Read-write URL of the Artifact Resolution Service on IdP to which Citrix ADC will post artifact to get actual SAML token.
skewtime Read-write This option specifies the allowed clock skew in number of minutes that Citrix ADC ServiceProvider allows on an incoming assertion. For example, if skewTime is 10, then assertion would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all.

Default value: 5
logoutbinding Read-write This element specifies the transport mechanism of saml logout messages.

Default value: POST

Possible values = REDIRECT, POST
forceauthn Read-write Option that forces authentication at the Identity Provider (IdP) that receives Citrix ADC’s request.

Default value: OFF

Possible values = ON, OFF
groupnamefield Read-write Name of the tag in assertion that contains user groups.
audience Read-write Audience for which assertion sent by IdP is applicable. This is typically entity name or url that represents ServiceProvider.
metadatarefreshinterval Read-write Interval in minutes for fetching metadata from specified metadata URL.

Default value: 3600
storesamlresponse Read-write Option to store entire SAML Response through the life of user session.

Default value: OFF

Possible values = ON, OFF
statechecks Read-write Boolean expression that will be evaluated to validate HTTP requests on SAML endpoints. Examples set authentication samlaction -stateChecks 'HTTP.REQ.HOSTNAME.EQ("https://fqdn.com.html")' . Maximum length = 8191
metadataimportstatus Read-only Describes metadata import status.

Default value: SUCCESS

Possible values = INIT, SUCCESS, FAIL
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationsamlaction":{
<b>"name":<String_value>,
</b>"metadataurl":true,
"samlsigningcertname":true,
"samlredirecturl":true,
"samlacsindex":true,
"samluserfield":true,
"samlrejectunsignedassertion":true,
"samlissuername":true,
"samltwofactor":true,
"defaultauthenticationgroup":true,
"attribute1":true,
"attribute2":true,
"attribute3":true,
"attribute4":true,
"attribute5":true,
"attribute6":true,
"attribute7":true,
"attribute8":true,
"attribute9":true,
"attribute10":true,
"attribute11":true,
"attribute12":true,
"attribute13":true,
"attribute14":true,
"attribute15":true,
"attribute16":true,
"attributes":true,
"relaystaterule":true,
"signaturealg":true,
"digestmethod":true,
"requestedauthncontext":true,
"authnctxclassref":true,
"customauthnctxclassref":true,
"samlbinding":true,
"attributeconsumingserviceindex":true,
"sendthumbprint":true,
"enforceusername":true,
"logouturl":true,
"artifactresolutionserviceurl":true,
"skewtime":true,
"logoutbinding":true,
"forceauthn":true,
"groupnamefield":true,
"audience":true,
"metadatarefreshinterval":true,
"storesamlresponse":true,
"statechecks":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationsamlaction":{
<b>"name":<String_value>,
</b>"metadataurl":<String_value>,
"samlidpcertname":<String_value>,
"samlsigningcertname":<String_value>,
"samlredirecturl":<String_value>,
"samlacsindex":<Double_value>,
"samluserfield":<String_value>,
"samlrejectunsignedassertion":<String_value>,
"samlissuername":<String_value>,
"samltwofactor":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"relaystaterule":<String_value>,
"signaturealg":<String_value>,
"digestmethod":<String_value>,
"requestedauthncontext":<String_value>,
"authnctxclassref":<String[]_value>,
"customauthnctxclassref":<String_value>,
"samlbinding":<String_value>,
"attributeconsumingserviceindex":<Double_value>,
"sendthumbprint":<String_value>,
"enforceusername":<String_value>,
"logouturl":<String_value>,
"artifactresolutionserviceurl":<String_value>,
"skewtime":<Double_value>,
"logoutbinding":<String_value>,
"forceauthn":<String_value>,
"groupnamefield":<String_value>,
"audience":<String_value>,
"metadatarefreshinterval":<Double_value>,
"storesamlresponse":<String_value>,
"statechecks":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationsamlaction":{
<b>"name":<String_value>,
</b>"metadataurl":<String_value>,
"samlidpcertname":<String_value>,
"samlsigningcertname":<String_value>,
"samlredirecturl":<String_value>,
"samlacsindex":<Double_value>,
"samluserfield":<String_value>,
"samlrejectunsignedassertion":<String_value>,
"samlissuername":<String_value>,
"samltwofactor":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"relaystaterule":<String_value>,
"signaturealg":<String_value>,
"digestmethod":<String_value>,
"requestedauthncontext":<String_value>,
"authnctxclassref":<String[]_value>,
"customauthnctxclassref":<String_value>,
"samlbinding":<String_value>,
"attributeconsumingserviceindex":<Double_value>,
"sendthumbprint":<String_value>,
"enforceusername":<String_value>,
"logouturl":<String_value>,
"artifactresolutionserviceurl":<String_value>,
"skewtime":<Double_value>,
"logoutbinding":<String_value>,
"forceauthn":<String_value>,
"groupnamefield":<String_value>,
"audience":<String_value>,
"metadatarefreshinterval":<Double_value>,
"storesamlresponse":<String_value>,
"statechecks":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationsamlaction resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? view=summary

Use this query-parameter to get the summary output of authenticationsamlaction resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationsamlaction resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationsamlaction": [ {
"name":<String_value>,
"metadataurl":<String_value>,
"samlidpcertname":<String_value>,
"samlsigningcertname":<String_value>,
"samlredirecturl":<String_value>,
"samlacsindex":<Double_value>,
"samluserfield":<String_value>,
"samlrejectunsignedassertion":<String_value>,
"samlissuername":<String_value>,
"samltwofactor":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"relaystaterule":<String_value>,
"signaturealg":<String_value>,
"digestmethod":<String_value>,
"requestedauthncontext":<String_value>,
"authnctxclassref":<String[]_value>,
"customauthnctxclassref":<String_value>,
"samlbinding":<String_value>,
"attributeconsumingserviceindex":<Double_value>,
"sendthumbprint":<String_value>,
"enforceusername":<String_value>,
"logouturl":<String_value>,
"artifactresolutionserviceurl":<String_value>,
"skewtime":<Double_value>,
"logoutbinding":<String_value>,
"forceauthn":<String_value>,
"groupnamefield":<String_value>,
"audience":<String_value>,
"metadatarefreshinterval":<Double_value>,
"metadataimportstatus":<String_value>,
"storesamlresponse":<String_value>,
"statechecks":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of authenticationsamlaction resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationsamlaction": [ {
"name":<String_value>,
"metadataurl":<String_value>,
"samlidpcertname":<String_value>,
"samlsigningcertname":<String_value>,
"samlredirecturl":<String_value>,
"samlacsindex":<Double_value>,
"samluserfield":<String_value>,
"samlrejectunsignedassertion":<String_value>,
"samlissuername":<String_value>,
"samltwofactor":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"relaystaterule":<String_value>,
"signaturealg":<String_value>,
"digestmethod":<String_value>,
"requestedauthncontext":<String_value>,
"authnctxclassref":<String[]_value>,
"customauthnctxclassref":<String_value>,
"samlbinding":<String_value>,
"attributeconsumingserviceindex":<Double_value>,
"sendthumbprint":<String_value>,
"enforceusername":<String_value>,
"logouturl":<String_value>,
"artifactresolutionserviceurl":<String_value>,
"skewtime":<Double_value>,
"logoutbinding":<String_value>,
"forceauthn":<String_value>,
"groupnamefield":<String_value>,
"audience":<String_value>,
"metadatarefreshinterval":<Double_value>,
"metadataimportstatus":<String_value>,
"storesamlresponse":<String_value>,
"statechecks":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationsamlaction? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationsamlaction": [ { "__count": "#no"} ] }

<!--NeedCopy-->
authenticationsamlaction