ADC NITRO APIs

sslfips

May 23, 2024

Contributed by:

Configuration for fips resource.

Properties

(click to see Operations )

Name	Permissions	Description
inithsm	Read-write	FIPS initialization level. The appliance currently supports Level-2 (FIPS 140-2). Possible values = Level-2
sopassword	Read-write	Security officer password that will be in effect after you have configured the HSM. Minimum length = 1
oldsopassword	Read-write	Old password for the security officer. Minimum length = 1
userpassword	Read-write	The Hardware Security Module’s (HSM) User password. Minimum length = 1
hsmlabel	Read-write	Label to identify the Hardware Security Module (HSM). Minimum length = 1
fipsfw	Read-write	Path to the FIPS firmware file. Minimum length = 1
erasedata	Read-only	Erase data. Default value: FIPS_ERASE Minimum length = 1
serial	Read-only	FIPS card serial number.
majorversion	Read-only	Firmware major version.
minorversion	Read-only	Firmware minor version.
fipshwmajorversion	Read-only	FIPS card hardware major version.
fipshwminorversion	Read-only	FIPS card hardware minor version.
fipshwversionstring	Read-only	FIPS card hardware extended version string.
flashmemorytotal	Read-only	Total size of the flash memory on card.
flashmemoryfree	Read-only	Total size of free flash memory.
sramtotal	Read-only	Total size of the SRAM memory on card.
sramfree	Read-only	Total size of free SRAM memory.
status	Read-only	Status.
flag	Read-only	Internal Flags.
serialno	Read-only	FIPS card serial number.
model	Read-only	FIPS card model info.
state	Read-only	FIPS card state.
firmwarereleasedate	Read-only	FIPS card firmware revision date.
coresmax	Read-only	Maximum number of crypto cores present in the FIPS card.
coresenabled	Read-only	Number of crypto cores enabled in the FIPS card.

Operations

(click to see Properties )

UPDATE
UNSET
RESET
GET (ALL)
CHANGE

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:* Mandatory parameters are marked in red and placeholder content is marked in green

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslfips HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"sslfips":{
<b>"inithsm":<String_value>,
</b><b>"sopassword":<String_value>,
</b><b>"oldsopassword":<String_value>,
</b><b>"userpassword":<String_value>,
</b>"hsmlabel":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslfips? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"sslfips":{
"hsmlabel":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

reset

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslfips? action=reset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"sslfips":{
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

change

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslfips? action=update HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"sslfips":{
<b>"fipsfw":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslfips HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "sslfips": [ {
"inithsm":<String_value>,
"sopassword":<String_value>,
"userpassword":<String_value>,
"oldsopassword":<String_value>,
"erasedata":<String_value>,
"hsmlabel":<String_value>,
"serial":<Integer_value>,
"majorversion":<Integer_value>,
"minorversion":<Integer_value>,
"fipshwmajorversion":<Integer_value>,
"fipshwminorversion":<Integer_value>,
"fipshwversionstring":<String_value>,
"flashmemorytotal":<Integer_value>,
"flashmemoryfree":<Integer_value>,
"sramtotal":<Integer_value>,
"sramfree":<Integer_value>,
"status":<Integer_value>,
"flag":<Integer_value>,
"serialno":<String_value>,
"model":<String_value>,
"state":<Integer_value>,
"firmwarereleasedate":<String_value>,
"coresmax":<Integer_value>,
"coresenabled":<Integer_value>
}]}

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

sslfips

May 23, 2024

Contributed by:

May 23, 2024

Contributed by:

sslfips

Properties

Operations

update

unset

reset

change

get (all)

In this article