ADC NITRO APIs

authenticationvserver_authenticationpolicy_binding

Binding object showing the authenticationpolicy that can be bound to authenticationvserver.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority Read-write The priority, if any, of the vpn vserver policy.
nextfactor Read-write On success invoke label.
gotopriorityexpression Read-write Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
policy Read-write The name of the policy, if any, bound to the authentication vserver.
groupextraction Read-write Applicable only while bindind classic authentication policy as advance authentication policy use nFactor.
name Read-write Name of the authentication virtual server to which to bind the policy.

Minimum length = 1
secondary Read-write Applicable only while bindind classic authentication policy as advance authentication policy use nFactor.
bindpoint Read-write Bind point to which to bind the policy. Applies only to rewrite and cache policies. If you do not set this parameter, the policy is bound to REQ_DEFAULT or RES_DEFAULT, depending on whether the policy rule is a response-time or a request-time expression.

Possible values = REQUEST, RESPONSE, ICA_REQUEST, OTHERTCP_REQUEST, AAA_REQUEST, AAA_RESPONSE
acttype Read-only .
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/authenticationvserver_authenticationpolicy_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"authenticationvserver_authenticationpolicy_binding":{
<b>"name":<String_value>,
</b>"policy":<String_value>,
"priority":<Double_value>,
"secondary":<Boolean_value>,
"groupextraction":<Boolean_value>,
"nextfactor":<String_value>,
"gotopriorityexpression":<String_value>,
"bindpoint":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> ? args=policy: <String_value> ,secondary: <Boolean_value> ,groupextraction: <Boolean_value> ,bindpoint: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of authenticationvserver_authenticationpolicy_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationvserver_authenticationpolicy_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationvserver_authenticationpolicy_binding": [ {
"priority":<Double_value>,
"nextfactor":<String_value>,
"gotopriorityexpression":<String_value>,
"policy":<String_value>,
"groupextraction":<Boolean_value>,
"name":<String_value>,
"secondary":<Boolean_value>,
"bindpoint":<String_value>,
"acttype":<Double_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationvserver_authenticationpolicy_binding": [ {
"priority":<Double_value>,
"nextfactor":<String_value>,
"gotopriorityexpression":<String_value>,
"policy":<String_value>,
"groupextraction":<Boolean_value>,
"name":<String_value>,
"secondary":<Boolean_value>,
"bindpoint":<String_value>,
"acttype":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_authenticationpolicy_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"authenticationvserver_authenticationpolicy_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
authenticationvserver_authenticationpolicy_binding