ADC NITRO APIs

appflowpolicylabel

Configuration for AppFlow policy label resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
labelname Read-write Name of the AppFlow policy label. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my appflow policylabel” or ‘my appflow policylabel’). Minimum length = 1
policylabeltype Read-write Type of traffic evaluated by the policies bound to the policy label.

Default value: HTTP

Possible values = HTTP, OTHERTCP, HTTP_QUIC
newname Read-write New name for the policy label. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my appflow policylabel” or ‘my appflow policylabel’). Minimum length = 1
numpol Read-only Number of polices bound to the policy label.
hits Read-only Number of times the policy label was invoked.
policyname Read-only Name of the AppFlow policy.
priority Read-only Specifies the priority of the policy.
gotopriorityexpression Read-only Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
labeltype Read-only Type of policy label to be invoked.

Possible values = vserver, policylabel
invoke_labelname Read-only Name of the label to invoke if the current policy evaluates to TRUE.
flowtype Read-only Flowtype of the bound AppFlow policy.
description Read-only Description of the policylabel.
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • RENAME
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? action=rename HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"appflowpolicylabel":{
<b>"labelname":<String_value>,
</b><b>"newname":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel/ labelname_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"appflowpolicylabel":{
<b>"labelname":<String_value>,
</b>"policylabeltype":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of appflowpolicylabel resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? view=summary

Use this query-parameter to get the summary output of appflowpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? pagesize=#no;pageno=#no

Use this query-parameter to get the appflowpolicylabel resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "appflowpolicylabel": [ {
"labelname":<String_value>,
"policylabeltype":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"policyname":<String_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"description":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel/ labelname_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel/ labelname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel/ labelname_value<String> ? view=summary

Use this query-parameter to get the summary output of appflowpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "appflowpolicylabel": [ {
"labelname":<String_value>,
"policylabeltype":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"policyname":<String_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"description":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowpolicylabel? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "appflowpolicylabel": [ { "__count": "#no"} ] }

<!--NeedCopy-->
appflowpolicylabel