ADC NITRO APIs

nsmigration

Configuration for Migration operation resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
dumpsession Read-write Displays the current active migrated session details, if DUMPSESSION option is YES.

Default value: NO

Possible values = YES, NO
migrationstatus Read-only ISSU Migration Status.

Possible values = Migration is not yet started, Migration is in progress and Failover is not yet done, Migration is in progress and Failover is completed, Rollback is initiated and Failover is not yet done, Rollback is initiated and Failover is completed, Migration is completed
migrationstarttime Read-only Timestamp for start migration.

Minimum length = 1
migrationendtime Read-only Timestamp for migration complete.

Minimum length = 1
migrationrollbackstarttime Read-only Timestamp for start migration rollback.

Minimum length = 1
srcip Read-only IP address to match against the source IP address of an incoming IPv4 packet.
srcport Read-only Port number to match against the source port number of an incoming IPv4 packet.
destip Read-only IP address to match against the destination IP address of an incoming IPv4 packet.
destport Read-only Port number to match against the destination port number of an incoming IPv4 packet.
timeout Read-only Time for which the connection is idle.
migdfdsessionsallocated Read-only Number of migration sessions allocated.
migdfdsessionsactive Read-only Number of migration sessions active.
migl4sessionsallocated Read-only Number of migration sessions allocated.
migl4sessionsactive Read-only Number of migration sessions active.
migdfdsessionsallocatedrollback Read-only Number of migration sessions allocated.
migdfdsessionsactiverollback Read-only Number of migration sessions active.
migl4sessionsallocatedrollback Read-only Number of migration sessions allocated.
migl4sessionsactiverollback Read-only Number of migration sessions active.
mighastateflag Read-only Current master state in HA.
__count Read-only count parameter

Operations

(click to see Properties )

  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsmigration Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? args=dumpsession: <String_value>

Use this query-parameter to get nsmigration resources based on additional properties.

attrs http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nsmigration resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? view=summary

Use this query-parameter to get the summary output of nsmigration resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? pagesize=#no;pageno=#no

Use this query-parameter to get the nsmigration resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsmigration": [ {
dumpsession:<String_value>"migrationstatus":<String_value>,
"migrationstarttime":<String_value>,
"migrationendtime":<String_value>,
"migrationrollbackstarttime":<String_value>,
"dumpsession":<String_value>,
"srcip":<String_value>,
"srcport":<Double_value>,
"destip":<String_value>,
"destport":<Double_value>,
"timeout":<Double_value>,
"migdfdsessionsallocated":<Double_value>,
"migdfdsessionsactive":<Double_value>,
"migl4sessionsallocated":<Double_value>,
"migl4sessionsactive":<Double_value>,
"migdfdsessionsallocatedrollback":<Double_value>,
"migdfdsessionsactiverollback":<Double_value>,
"migl4sessionsallocatedrollback":<Double_value>,
"migl4sessionsactiverollback":<Double_value>,
"mighastateflag":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsmigration? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsmigration": [ { "__count": "#no"} ] }

<!--NeedCopy-->
nsmigration