ADC NITRO APIs

lbwlm

Configuration for web log manager resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
wlmname Read-write The name of the Work Load Manager.

Minimum length = 1
ipaddress Read-write The IP address of the WLM.
port Read-write The port of the WLM.

Range 1 - 65535

* in CLI is represented as 65535 in NITRO API
lbuid Read-write The LBUID for the Load Balancer to communicate to the Work Load Manager.
katimeout Read-write The idle time period after which Citrix ADC would probe the WLM. The value ranges from 1 to 1440 minutes.

Default value: 2

Minimum value = 0

Maximum value = 1440
secure Read-only Use this parameter to enable secure mode of communication with WLM.

Possible values = YES, NO
state Read-only State of the WLM.

Possible values = ACTIVE, INACTIVE, UNKNOWN
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lbwlm":{ <b>"wlmname":<String_value>, </b>"ipaddress":<String_value>, "port":<Integer_value>, <b>"lbuid":<String_value>, </b>"katimeout":<Double_value> }}

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm/ wlmname_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lbwlm":{ <b>"wlmname":<String_value>, </b>"katimeout":<Double_value> }}

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lbwlm":{ <b>"wlmname":<String_value>, </b>"katimeout":true }}

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lbwlm resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? view=summary

Use this query-parameter to get the summary output of lbwlm resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? pagesize=#no;pageno=#no

Use this query-parameter to get the lbwlm resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lbwlm": [ { "wlmname":<String_value>, "ipaddress":<String_value>, "port":<Integer_value>, "secure":<String_value>, "katimeout":<Double_value>, "lbuid":<String_value>, "state":<String_value> }]}

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm/ wlmname_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lbwlm/ wlmname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/lbwlm/ wlmname_value<String> ? view=summary

Use this query-parameter to get the summary output of lbwlm resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lbwlm": [ { "wlmname":<String_value>, "ipaddress":<String_value>, "port":<Integer_value>, "secure":<String_value>, "katimeout":<Double_value>, "lbuid":<String_value>, "state":<String_value> }]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbwlm? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lbwlm": [ { "__count": "#no"} ] }
lbwlm