-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
nspbr6
-
-
-
-
-
-
-
-
videooptimizationdetectionpolicylabel_videooptimizationdetectionpolicy_binding
-
videooptimizationdetectionpolicy_videooptimizationglobaldetection_binding
-
videooptimizationglobaldetection_videooptimizationdetectionpolicy_binding
-
videooptimizationglobalpacing_videooptimizationpacingpolicy_binding
-
videooptimizationpacingpolicylabel_videooptimizationpacingpolicy_binding
-
videooptimizationpacingpolicy_videooptimizationglobalpacing_binding
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
nspbr6
Configuration for PBR6 entry resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
name |
|
Read-write | Name for the PBR6. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the PBR6 is created.
Minimum length = 1 |
td |
|
Read-write | Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0 Maximum value = 4094 |
action |
|
Read-write | Action to perform on the outgoing IPv6 packets that match the PBR6.
Available settings function as follows
|
srcipv6 |
|
Read-write | IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. |
srcipop |
|
Read-write | Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ |
srcipv6val |
|
Read-write | IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. |
srcport |
|
Read-write | Port number or range of port numbers to match against the source port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90. |
srcportop |
|
Read-write | Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ |
srcportval |
|
Read-write | Source port (range).
Maximum length = 65535 |
destipv6 |
|
Read-write | IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. |
destipop |
|
Read-write | Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ |
destipv6val |
|
Read-write | IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. |
destport |
|
Read-write | Port number or range of port numbers to match against the destination port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90.
Note: The destination port can be specified only for TCP and UDP protocols. |
destportop |
|
Read-write | Either the equals (=) or does not equal (!=) logical operator.
Possible values = =, !=, EQ, NEQ |
destportval |
|
Read-write | Destination port (range).
Maximum length = 65535 |
srcmac |
|
Read-write | MAC address to match against the source MAC address of an outgoing IPv6 packet. |
srcmacmask |
|
Read-write | Used to define range of Source MAC address. It takes string of 0 and 1, 0s are for exact match and 1s for wildcard. For matching first 3 bytes of MAC address, srcMacMask value “000000111111”. .
Default value: “000000000000” |
protocol |
|
Read-write | Protocol, identified by protocol name, to match against the protocol of an outgoing IPv6 packet.
Possible values = ICMPV6, TCP, UDP, ICMP, IGMP, EGP, IGP, ARGUS, RDP, RSVP, EIGRP, L2TP, ISIS, GGP, IPoverIP, ST, CBT, BBN-RCC-M, NVP-II, PUP, EMCON, XNET, CHAOS, MUX, DCN-MEAS, HMP, PRM, XNS-IDP, TRUNK-1, TRUNK-2, LEAF-1, LEAF-2, IRTP, ISO-TP4, NETBLT, MFE-NSP, MERIT-INP, SEP, 3PC, IDPR, XTP, DDP, IDPR-CMTP, TP++, IL, IPv6, SDRP, IPv6-Route, IPv6-Frag, IDRP, GRE, MHRP, BNA, ESP, AH, I-NLSP, SWIPE, NARP, MOBILE, TLSP, SKIP, IPv6-NoNx, IPv6-Opts, Any-Host-Internal-Protocol, CFTP, Any-Local-Network, SAT-EXPAK, KRYPTOLAN, RVD, IPPC, Any-Distributed-File-System, TFTP, VISA, IPCV, CPNX, CPHB, WSN, PVP, BR-SAT-MO, SUN-ND, WB-MON, WB-EXPAK, ISO-IP, VMTP, SECURE-VM, VINES, TTP, NSFNET-IG, DGP, TCF, OSPFIGP, Sprite-RP, LARP, MTP, AX.25, IPIP, MICP, SCC-SP, ETHERIP, Any-Private-Encryption-Scheme, GMTP, IFMP, PNNI, PIM, ARIS, SCPS, QNX, A/N, IPComp, SNP, Compaq-Pe, IPX-in-IP, VRRP, PGM, Any-0-Hop-Protocol, ENCAP, DDX, IATP, STP, SRP, UTI, SMP, SM, PTP, FIRE, CRTP, CRUDP, SSCOPMCE, IPLT, SPS, PIPE, SCTP, FC, RSVP-E2E-IGNORE, Mobility-Header, UDPLite |
protocolnumber |
|
Read-write | Protocol, identified by protocol number, to match against the protocol of an outgoing IPv6 packet.
Minimum value = 1 Maximum value = 255 |
vlan |
|
Read-write | ID of the VLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VLANs.
Minimum value = 1 Maximum value = 4094 |
vxlan |
|
Read-write | ID of the VXLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VXLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VXLANs.
Minimum value = 1 Maximum value = 16777215 |
Interface |
|
Read-write | ID of an interface. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified interface. If you do not specify a value, the appliance compares the PBR6 to the outgoing packets on all interfaces. |
priority |
|
Read-write | Priority of the PBR6, which determines the order in which it is evaluated relative to the other PBR6s. If you do not specify priorities while creating PBR6s, the PBR6s are evaluated in the order in which they are created.
Minimum value = 1 Maximum value = 81920 |
state |
|
Read-write | Enable or disable the PBR6. After you apply the PBR6s, the Citrix ADC compares outgoing packets to the enabled PBR6s.
Default value: ENABLED Possible values = ENABLED, DISABLED |
msr |
|
Read-write | Monitor the route specified by the Next Hop parameter.
Default value: DISABLED Possible values = ENABLED, DISABLED |
monitor |
|
Read-write | The name of the monitor.(Can be only of type ping or ARP ).
Minimum length = 1 |
nexthop |
|
Read-write | IP address of the next hop router to which to send matching packets if action is set to ALLOW. This next hop should be directly reachable from the appliance. |
nexthopval |
|
Read-write | The Next Hop IPv6 address. |
iptunnel |
|
Read-write | The iptunnel name where packets need to be forwarded upon. |
vxlanvlanmap |
|
Read-write | The vlan to vxlan mapping to be applied for incoming packets over this pbr tunnel. |
nexthopvlan |
|
Read-write | VLAN number to be used for link local nexthop .
Minimum value = 1 Maximum value = 4094 |
ownergroup |
|
Read-write | The owner node group in a Cluster for this pbr rule. If owner node group is not specified then the pbr rule is treated as Striped pbr rule.
Default value: DEFAULT_NG Minimum length = 1 |
detail |
|
Read-write | To get a detailed view. |
kernelstate |
|
Read-only | Commit status of the PBR6.
Default value: NOTAPPLIED Possible values = APPLIED, NOTAPPLIED, RE-APPLY, SFAPPLIED, SFNOTAPPLIED |
hits |
|
Read-only | Number of hits of this PBR6. |
curstate |
|
Read-only | If this route is UP/DOWN. |
totalprobes |
|
Read-only | The total number of probes sent. |
totalfailedprobes |
|
Read-only | The total number of failed probes. |
failedprobes |
|
Read-only | Number of the current failed monitoring probes. |
monstatcode |
|
Read-only | The code indicating the monitor response. |
monstatparam1 |
|
Read-only | First parameter for use with message code. |
monstatparam2 |
|
Read-only | Second parameter for use with message code. |
monstatparam3 |
|
Read-only | Third parameter for use with message code. |
data |
|
Read-only | Internal data of this route. |
__count |
|
Read-only | count parameter |
Operations
(click to see Properties )
- ADD
- RENUMBER
- DELETE
- UPDATE
- UNSET
- ENABLE
- DISABLE
- GET (ALL)
- GET
- COUNT
- CLEAR
- APPLY
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
add
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6 HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
<b>"name":<String_value>,
</b>"td":<Double_value>,
<b>"action":<String_value>,
</b>"srcipv6":<Boolean_value>,
"srcipop":<String_value>,
"srcipv6val":<String_value>,
"srcport":<Boolean_value>,
"srcportop":<String_value>,
"srcportval":<String_value>,
"destipv6":<Boolean_value>,
"destipop":<String_value>,
"destipv6val":<String_value>,
"destport":<Boolean_value>,
"destportop":<String_value>,
"destportval":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"Interface":<String_value>,
"priority":<Double_value>,
"state":<String_value>,
"msr":<String_value>,
"monitor":<String_value>,
"nexthop":<Boolean_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"ownergroup":<String_value>
}}
Response: HTTP Status Code on Success: 201 Created
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
renumber
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=renumber HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
delete
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6/ name_value<String> HTTP Method: DELETE
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
update
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6 HTTP Method: PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
<b>"name":<String_value>,
</b>"action":<String_value>,
"srcipv6":<Boolean_value>,
"srcipop":<String_value>,
"srcipv6val":<String_value>,
"srcport":<Boolean_value>,
"srcportop":<String_value>,
"srcportval":<String_value>,
"destipv6":<Boolean_value>,
"destipop":<String_value>,
"destipv6val":<String_value>,
"destport":<Boolean_value>,
"destportop":<String_value>,
"destportval":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"Interface":<String_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"nexthop":<Boolean_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
unset
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=unset HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
<b>"name":<String_value>,
</b>"srcipv6":true,
"srcport":true,
"destipv6":true,
"destport":true,
"srcmac":true,
"srcmacmask":true,
"protocol":true,
"Interface":true,
"vlan":true,
"vxlan":true,
"msr":true,
"monitor":true,
"nexthop":true,
"iptunnel":true,
"nexthopvlan":true,
"vxlanvlanmap":true
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
enable
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=enable HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
<b>"name":<String_value>
</b>}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
disable
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=disable HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
<b>"name":<String_value>
</b>}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
clear
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=clear HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
apply
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? action=apply HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"nspbr6":{
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6 Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? args=name: <String_value> ,detail: <Boolean_value>
Use this query-parameter to get nspbr6 resources based on additional properties.
attrs http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of nspbr6 resources configured on NetScaler.Filtering can be done on any of the properties of the resource.
view http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? view=summary
Use this query-parameter to get the summary output of nspbr6 resources configured on NetScaler.
Note: By default, the retrieved results are displayed in detail view (?view=detail).
pagination http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? pagesize=#no;pageno=#no
Use this query-parameter to get the nspbr6 resources in chunks.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "nspbr6": [ {
name:<String_value>,detail:<Boolean_value>"td":<Double_value>,
"action":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"srcportval":<String_value>,
"srcportop":<String_value>,
"destportval":<String_value>,
"destportop":<String_value>,
"srcipv6val":<String_value>,
"srcipop":<String_value>,
"destipv6val":<String_value>,
"destipop":<String_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"state":<String_value>,
"kernelstate":<String_value>,
"Interface":<String_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"curstate":<Double_value>,
"totalprobes":<Double_value>,
"totalfailedprobes":<Double_value>,
"failedprobes":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"data":<Boolean_value>,
"ownergroup":<String_value>
}]}
get
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/nspbr6/ name_value<String> ? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view http:// <netscaler-ip-address> /nitro/v1/config/nspbr6/ name_value<String> ? view=summary
Use this query-parameter to get the summary output of nspbr6 resources configured on NetScaler.
Note: By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "nspbr6": [ {
name:<String_value>,detail:<Boolean_value>"td":<Double_value>,
"action":<String_value>,
"srcmac":<String_value>,
"srcmacmask":<String_value>,
"protocol":<String_value>,
"protocolnumber":<Double_value>,
"srcportval":<String_value>,
"srcportop":<String_value>,
"destportval":<String_value>,
"destportop":<String_value>,
"srcipv6val":<String_value>,
"srcipop":<String_value>,
"destipv6val":<String_value>,
"destipop":<String_value>,
"vlan":<Double_value>,
"vxlan":<Double_value>,
"state":<String_value>,
"kernelstate":<String_value>,
"Interface":<String_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"msr":<String_value>,
"monitor":<String_value>,
"curstate":<Double_value>,
"totalprobes":<Double_value>,
"totalfailedprobes":<Double_value>,
"failedprobes":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"nexthopval":<String_value>,
"iptunnel":<String_value>,
"vxlanvlanmap":<String_value>,
"nexthopvlan":<Double_value>,
"data":<Boolean_value>,
"ownergroup":<String_value>
}]}
count
URL: http:// <netscaler-ip-address> /nitro/v1/config/nspbr6? count=yes HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "nspbr6": [ { "__count": "#no"} ] }
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.