ADC NITRO APIs

nscqaparam

May 23, 2024

Contributed by:

Configuration for cqaparam resource.

Properties

(click to see Operations )

Name	Permissions	Description
harqretxdelay	Read-write	HARQ retransmission delay (in ms). Default value: 0 Minimum value = 1 Maximum value = 64000
net1label	Read-write	Name of the network label. Maximum length = 15
minrttnet1	Read-write	MIN RTT (in ms) for the first network. Default value: 0 Minimum value = 0 Maximum value = 6400
lr1coeflist	Read-write	coefficients values for Label1.
lr1probthresh	Read-write	Probability threshold values for LR model to differentiate between NET1 and reset(NET2 and NET3). Default value: 0 Minimum value = 0 Maximum value = 1
net1cclscale	Read-write	Three congestion level scores limits corresponding to None, Low, Medium.
net1csqscale	Read-write	Three signal quality level scores limits corresponding to Excellent, Good, Fair.
net1logcoef	Read-write	Connection quality ranking Log coefficients of network 1.
net2label	Read-write	Name of the network label 2. Maximum length = 15
minrttnet2	Read-write	MIN RTT (in ms) for the second network. Default value: 0 Minimum value = 0 Maximum value = 6400
lr2coeflist	Read-write	coefficients values for Label 2.
lr2probthresh	Read-write	Probability threshold values for LR model to differentiate between NET2 and NET3. Default value: 0 Minimum value = 0 Maximum value = 1
net2cclscale	Read-write	Three congestion level scores limits corresponding to None, Low, Medium.
net2csqscale	Read-write	Three signal quality level scores limits corresponding to Excellent, Good, Fair.
net2logcoef	Read-write	Connnection quality ranking Log coefficients of network 2.
net3label	Read-write	Name of the network label 3. Maximum length = 15
minrttnet3	Read-write	MIN RTT (in ms) for the third network. Default value: 0 Minimum value = 0 Maximum value = 6400
net3cclscale	Read-write	Three congestion level scores limits corresponding to None, Low, Medium.
net3csqscale	Read-write	Three signal quality level scores limits corresponding to Excellent, Good, Fair.
net3logcoef	Read-write	Connection quality ranking Log coefficients of network 3.

Operations

(click to see Properties )

UPDATE
UNSET
GET (ALL)

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:* Mandatory parameters are marked in red and placeholder content is marked in green

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/nscqaparam HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nscqaparam":{
"harqretxdelay":<Double_value>,
"net1label":<String_value>,
"minrttnet1":<Double_value>,
"lr1coeflist":<String_value>,
"lr1probthresh":<Double_value>,
"net1cclscale":<String_value>,
"net1csqscale":<String_value>,
"net1logcoef":<String_value>,
"net2label":<String_value>,
"minrttnet2":<Double_value>,
"lr2coeflist":<String_value>,
"lr2probthresh":<Double_value>,
"net2cclscale":<String_value>,
"net2csqscale":<String_value>,
"net2logcoef":<String_value>,
"net3label":<String_value>,
"minrttnet3":<Double_value>,
"net3cclscale":<String_value>,
"net3csqscale":<String_value>,
"net3logcoef":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/nscqaparam? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nscqaparam":{
"harqretxdelay":true,
"net1label":true,
"minrttnet1":true,
"lr1coeflist":true,
"lr1probthresh":true,
"net1cclscale":true,
"net1csqscale":true,
"net1logcoef":true,
"net2label":true,
"minrttnet2":true,
"net2cclscale":true,
"net2csqscale":true,
"net2logcoef":true,
"net3label":true,
"minrttnet3":true,
"net3cclscale":true,
"net3csqscale":true,
"net3logcoef":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/nscqaparam HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nscqaparam": [ {
"harqretxdelay":<Double_value>,
"net1label":<String_value>,
"net2label":<String_value>,
"minrttnet1":<Double_value>,
"lr1coeflist":<String_value>,
"lr1probthresh":<Double_value>,
"net1cclscale":<String_value>,
"net1csqscale":<String_value>,
"net1logcoef":<String_value>,
"minrttnet2":<Double_value>,
"lr2coeflist":<String_value>,
"lr2probthresh":<Double_value>,
"net2cclscale":<String_value>,
"net2csqscale":<String_value>,
"net2logcoef":<String_value>,
"net3label":<String_value>,
"minrttnet3":<Double_value>,
"net3cclscale":<String_value>,
"net3csqscale":<String_value>,
"net3logcoef":<String_value>
}]}

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

nscqaparam

May 23, 2024

Contributed by:

May 23, 2024

Contributed by:

nscqaparam

Properties

Operations

update

unset

get (all)

In this article