ADC NITRO APIs

vpnnexthopserver

Configuration for Next Hop Server resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name for the Citrix Gateway appliance in the first DMZ.

Minimum length = 1

Maximum length = 32
nexthopip Read-write IP address of the Citrix Gateway proxy in the second DMZ.
nexthopfqdn Read-write FQDN of the Citrix Gateway proxy in the second DMZ.

Minimum length = 1
resaddresstype Read-write Address Type (IPV4/IPv6) of DNS name of nextHopServer FQDN.

Minimum length = 1

Possible values = IPV4, IPV6
nexthopport Read-write Port number of the Citrix Gateway proxy in the second DMZ.

Minimum value = 1

Maximum value = 65535
secure Read-write Use of a secure port, such as 443, for the double-hop configuration.

Default value: OFF

Possible values = ON, OFF
__count Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnnexthopserver":{
<b>"name":<String_value>,
</b>"nexthopip":<String_value>,
"nexthopfqdn":<String_value>,
"resaddresstype":<String_value>,
<b>"nexthopport":<Integer_value>,
</b>"secure":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vpnnexthopserver resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver? view=summary

Use this query-parameter to get the summary output of vpnnexthopserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver? pagesize=#no;pageno=#no

Use this query-parameter to get the vpnnexthopserver resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vpnnexthopserver": [ {
"name":<String_value>,
"nexthopip":<String_value>,
"nexthopfqdn":<String_value>,
"resaddresstype":<String_value>,
"nexthopport":<Integer_value>,
"secure":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of vpnnexthopserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vpnnexthopserver": [ {
"name":<String_value>,
"nexthopip":<String_value>,
"nexthopfqdn":<String_value>,
"resaddresstype":<String_value>,
"nexthopport":<Integer_value>,
"secure":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnnexthopserver? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vpnnexthopserver": [ { "__count": "#no"} ] }

<!--NeedCopy-->
vpnnexthopserver