ADC NITRO APIs

vxlan

May 23, 2024

Contributed by:

Configuration for “VXLAN” resource.

Properties

(click to see Operations )

Name	Permissions	Description
id	Read-write	A positive integer, which is also called VXLAN Network Identifier (VNI), that uniquely identifies a VXLAN. Minimum value = 1 Maximum value = 16777215
vlan	Read-write	ID of VLANs whose traffic is allowed over this VXLAN. If you do not specify any VLAN IDs, the Citrix ADC allows traffic of all VLANs that are not part of any other VXLANs. Minimum value = 2 Maximum value = 4094
port	Read-write	Specifies UDP destination port for VXLAN packets. Default value: 4789 Minimum value = 1 Maximum value = 65534
dynamicrouting	Read-write	Enable dynamic routing on this VXLAN. Default value: DISABLED Possible values = ENABLED, DISABLED
ipv6dynamicrouting	Read-write	Enable all IPv6 dynamic routing protocols on this VXLAN. Note: For the ENABLED setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line. Default value: DISABLED Possible values = ENABLED, DISABLED
type	Read-write	VXLAN encapsulation type. VXLAN, VXLANGPE. Default value: VXLAN Possible values = VXLAN, VXLANGPE
protocol	Read-write	VXLAN-GPE next protocol. RESERVED, IPv4, IPv6, ETHERNET, NSH. Default value: ETHERNET Possible values = IPv4, IPv6, ETHERNET, NSH
innervlantagging	Read-write	Specifies whether Citrix ADC should generate VXLAN packets with inner VLAN tag. Default value: DISABLED Possible values = ENABLED, DISABLED
td	Read-only	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
partitionname	Read-only	The Partition to which this vxlan is bound. Minimum length = 1
__count	Read-only	count parameter

Operations

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:* Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"type":<String_value>,
"protocol":<String_value>,
"innervlantagging":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>"id":<Double_value>,
</b>"vlan":true,
"port":true,
"dynamicrouting":true,
"ipv6dynamicrouting":true,
"innervlantagging":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vxlan? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/vxlan? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vxlan resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/vxlan? view=summary

Use this query-parameter to get the summary output of vxlan resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/vxlan? pagesize=#no;pageno=#no

Use this query-parameter to get the vxlan resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vxlan": [ {
"id":<Double_value>,
"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>,
"td":<Double_value>,
"type":<String_value>,
"protocol":<String_value>,
"partitionname":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> ? view=summary

Use this query-parameter to get the summary output of vxlan resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vxlan": [ {
"id":<Double_value>,
"vlan":<Double_value>,
"port":<Integer_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"innervlantagging":<String_value>,
"td":<Double_value>,
"type":<String_value>,
"protocol":<String_value>,
"partitionname":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vxlan": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

vxlan

May 23, 2024

Contributed by:

May 23, 2024

Contributed by:

vxlan

Properties

Operations

add

delete

update

unset

get (all)

get

count

In this article