ADC NITRO APIs

appfwprofile_fieldconsistency_binding

Binding object showing the fieldconsistency that can be bound to appfwprofile.

Properties

(click to see Operations )

Name Data Type Permissions Description
fieldconsistency Read-write The web form field name.
state Read-write Enabled.

Possible values = ENABLED, DISABLED
resourceid Read-write A “id” that identifies the rule.
name Read-write Name of the profile to which to bind an exemption or rule.

Minimum length = 1
alertonly Read-write Send SNMP alert?.

Possible values = ON, OFF
isregex_ffc Read-write Is the web form field name a regular expression?.

Possible values = REGEX, NOTREGEX
formactionurl_ffc Read-write The web form action URL.
ruletype Read-write Specifies rule type of binding.

Possible values = ALLOW, DENY
isautodeployed Read-write Is the rule auto deployed by dynamic profile ?.

Possible values = AUTODEPLOYED, NOTAUTODEPLOYED
comment Read-write Any comments about the purpose of profile, or other useful information about the profile.
__count Read-write count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/appfwprofile_fieldconsistency_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"appfwprofile_fieldconsistency_binding":{
<b>"name":<String_value>,
</b>"fieldconsistency":<String_value>,
"formactionurl_ffc":<String_value>,
"isregex_ffc":<String_value>,
"comment":<String_value>,
"state":<String_value>,
"isautodeployed":<String_value>,
"resourceid":<String_value>,
"ruletype":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> ? args=fieldconsistency: <String_value> ,formactionurl_ffc: <String_value> ,ruletype: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of appfwprofile_fieldconsistency_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the appfwprofile_fieldconsistency_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "appfwprofile_fieldconsistency_binding": [ {
"fieldconsistency":<String_value>,
"state":<String_value>,
"resourceid":<String_value>,
"name":<String_value>,
"alertonly":<String_value>,
"isregex_ffc":<String_value>,
"formactionurl_ffc":<String_value>,
"ruletype":<String_value>,
"isautodeployed":<String_value>,
"comment":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "appfwprofile_fieldconsistency_binding": [ {
"fieldconsistency":<String_value>,
"state":<String_value>,
"resourceid":<String_value>,
"name":<String_value>,
"alertonly":<String_value>,
"isregex_ffc":<String_value>,
"formactionurl_ffc":<String_value>,
"ruletype":<String_value>,
"isautodeployed":<String_value>,
"comment":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_fieldconsistency_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"appfwprofile_fieldconsistency_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
appfwprofile_fieldconsistency_binding