ADC NITRO APIs

vpnurlpolicy

Configuration for VPN url policy resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name Read-write Name for the new urlPolicy.

Minimum length = 1
rule Read-write Expression, or name of a named expression, specifying the traffic that matches the policy. The following requirements apply only to the NetScaler CLI
  • If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
  • If the expression itself includes double quotation marks, escape the quotations by using the \ character.
  • Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks.
  • action Read-write Action to be applied by the new urlPolicy if the rule criteria are met.

    Minimum length = 1
    comment Read-write Any comments to preserve information about this policy.
    logaction Read-write Name of messagelog action to use when a request matches this policy.
    newname Read-write New name for the vpn urlPolicy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the NetScaler CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my vpnurl policy” or ‘my vpnurl policy’). Minimum length = 1
    builtin <String[]> Read-only Indicates that a variable is a built-in (SYSTEM INTERNAL) type.

    Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
    undefhits Read-only The number of times the policy evaluation resulted in undefined processing.
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • UPDATE
    • UNSET
    • GET (ALL)
    • GET
    • COUNT
    • RENAME

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: * Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"vpnurlpolicy":{
    <b>"name":<String_value>,
    </b><b>"rule":<String_value>,
    </b><b>"action":<String_value>,
    </b>"comment":<String_value>,
    "logaction":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy/ name_value<String> HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    update

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"vpnurlpolicy":{
    <b>"name":<String_value>,
    </b>"rule":<String_value>,
    "action":<String_value>,
    "comment":<String_value>,
    "logaction":<String_value>
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    unset

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? action=unset HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"vpnurlpolicy":{
    <b>"name":<String_value>,
    </b>"comment":true,
    "logaction":true
    }}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    rename

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? action=rename HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload:

    {"vpnurlpolicy":{
    <b>"name":<String_value>,
    </b><b>"newname":<String_value>
    </b>}}
    
    <!--NeedCopy-->
    

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    filter http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? filter=property-name1:property-val1,property-name2:property-val2

    Use this query-parameter to get the filtered set of vpnurlpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    view http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? view=summary

    Use this query-parameter to get the summary output of vpnurlpolicy resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    pagination http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? pagesize=#no;pageno=#no

    Use this query-parameter to get the vpnurlpolicy resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "vpnurlpolicy": [ {
    "name":<String_value>,
    "rule":<String_value>,
    "action":<String_value>,
    "comment":<String_value>,
    "logaction":<String_value>,
    "builtin":<String[]_value>,
    "undefhits":<Double_value>
    }]}
    
    <!--NeedCopy-->
    

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy/ name_value<String> ? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    view http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy/ name_value<String> ? view=summary

    Use this query-parameter to get the summary output of vpnurlpolicy resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    {  "vpnurlpolicy": [ {
    "name":<String_value>,
    "rule":<String_value>,
    "action":<String_value>,
    "comment":<String_value>,
    "logaction":<String_value>,
    "builtin":<String[]_value>,
    "undefhits":<Double_value>
    }]}
    
    <!--NeedCopy-->
    

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnurlpolicy? count=yes HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response: HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload:

    { "vpnurlpolicy": [ { "__count": "#no"} ] }
    
    <!--NeedCopy-->
    
    vpnurlpolicy